Page 21 / 95
Scroll up to view Page 16 - 20
T-Mobile TM-G5240 Wireless Router User Manual
Version 0.7 041807
18
4. Plug in the power adapter to your modem. The lights on your modem should start
flashing. When done, click the
Next
button on the Wizard.
5. Plug the power adapter into the back of the TM-G5240. When done, click the
Next
button on the Wizard.
Downloaded from
www.Manualslib.com
manuals search engine
Page 22 / 95
T-Mobile TM-G5240 Wireless Router User Manual
Version 0.7 041807
19
6. Observe the status lights on the front of the router. The lights for Power, Internet,
Wireless, and one of the numbered ports (1-4) should be lit. If not lit, make sure
that all cables are securely connected and if necessary select back to check your
cabling. When done, click the
Next
button on the Wizard.
7. Your cables should look similar to the image shown below after you have finished
connecting all hardware components.
Remember to attach the Antenna.
Downloaded from
www.Manualslib.com
manuals search engine
Page 23 / 95
T-Mobile TM-G5240 Wireless Router User Manual
Version 0.7 041807
20
Checks Internet Connection Type
After you have finished connecting the cables, the Installation Wizard will check
your Internet connection and display the following screen while detecting the type
of internet connection you have..
Note:
If you do not get this screen that means something is wrong with the
connection between the computer running the CD and your wireless router.
See
the Troubleshooting section of this User Guide or the FAQ’s document.
Downloaded from
www.Manualslib.com
manuals search engine
Page 24 / 95
T-Mobile TM-G5240 Wireless Router User Manual
Version 0.7 041807
21
Configuration of TM-G5240
7.
After successfully detecting your Internet type you will see one of the following
three screens.
If you are unsure of the setting, DO NOT change it.
•
Most Cable users should have DHCP (Cable)
•
Most DSL users will have either PPPOE (DSL) or DHCP (Cable)
•
Typically if you have a static IP, you know it.
DHCP (Cable)
If you select
DHCP (Cable)
from the drop-down box, then all you need is to click
the
Next
button on the Wizard.
Downloaded from
www.Manualslib.com
manuals search engine
Page 25 / 95
T-Mobile TM-G5240 Wireless Router User Manual
Version 0.7 041807
22
Static IP
If you select
Static IP
from the drop-down box, you must complete the information
on this screen. Refer to your Internet Service Provider (ISP) for information on IP
address, subnet mask, and so on.
When done, click the
Next
button on the Wizard.
PPPOE (DSL)
If you select
PPPOE (DSL)
from the drop-down box, then type your username and
password to log in to the Internet.
When done, click the
Next
button on the Wizard.
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live