Page 16 / 64
Scroll up to view Page 11 - 15
15
Internet
Profile Configuration
This page displays the network profiles that are currently being used.
Select one from the list and then click Connect to establish a
connection, or click Edit to modify the selected profile.
Page 17 / 64
16
Internet
Network Scan
This function scans for nearby network providers.
4G Network Selection Method:
Choose Auto to scan for network
providers automatically or choose Manual to scan manually.
After scanning, nearby network providers will be listed in the chart.
Select your desired network provider and then click Apply to apply the
changes or click Scan to scan again.
Page 18 / 64
17
3.3.3
Wi-Fi
Wi-Fi
Device List
This page displays the client devices that are currently connected to
the DWR-923 via Wi-Fi.
Wi-Fi
Wi-Fi Settings
You will need to establish a wireless local area network (WLAN) to
connect your client devices with the DWR-923 wirelessly and to access
the Internet. You can mark the box of the SSID and click Edit to modify
its contents or click SSID Schedule to set a schedule rule for this
network.
Page 19 / 64
18
This page pops up when you click Edit in Wi-Fi
Wi-Fi Settings.
Enable SSID:
Choose to Enable or Disable the function.
SSID:
The Service Set Identifier (SSID) is the name of the wireless
network broadcast from this system. In order for computers to connect
to the local network over a wireless link, they must select this network
name from the list of detected wireless networks in the area.
Security:
Select one security method from the drop-down list.
None
: No protection, open mode.
WPA Personal
: Use WPA Personal for encryption.
WPA2 Personal
: Use WPA2 Personal for encryption.
WPA+WPA2 Personal
: Enables wireless with personal wireless
protected access mode.
WEP
: Enables wireless with WEP protection, provides a 5/13 character
ASCII string to enable 64/128 bit encryption respectively. This option is
only recommended when your network device does not support WPA
or WPA2.
Page 20 / 64
19
Password:
Specify a password for your wireless network.
Show Plain Password:
Check the box to make the password visible.
Click Apply to apply the changes. Or click Reset to undo your
configurations. After this step, you can use your wireless client devices,
such as your smart phone, to search for the WLAN with the SSID and
password that you just specified.
This page pops up when you choose to set a schedule rule for a
wireless network in Wi-Fi
Wi-Fi Settings.
To set schedule rule for a network:
1.
Click Add to add a new schedule rule.
Active Time:
Mark the box to enable this schedule rule.
Schedule Name:
Name of this schedule.
Start Time and Stop Time:
The time that you wish to turn on or turn
off this wireless network.
2.
Click Apply to apply the changes.
19216811.live