Page 11 / 64
Scroll up to view Page 6 - 10
10
System Information:
System Name
: Displays the DWR-923
’
s configured name.
System Uptime
: Elapsed time since the DWR-923 was last turned on or
rebooted.
HW Version
: Hardware version that the DWR-923 is currently using.
SW Version
: Firmware version that the DWR-923 is currently using.
Wi-Fi:
SSID:
Names of the DWR-923
’
s wireless networks.
Security:
Encryption and authentication settings of each wireless
network.
Channel:
Current channel that the DWR-923 uses.
Total Clients:
Number of client devices connected via Wi-Fi.
LAN:
LAN1~4
: Connection status of the four LAN ports of the DWR-923.
Subnet Mask
: The DWR-923
’
s LAN subnet mask.
DHCP Pool
: IP address range that the DWR-923 will assign from within.
Phone:
Phone1 &2
: Status of connected VoIP phones.
Page 12 / 64
11
3.3.2
Internet
Internet
Status
4G Connection Status:
Registration State: Status of connection to a network service.
Radio Interference: Any interference conditions that the
DWR-923 has
detected.
Page 13 / 64
12
RSSI:
Received Signal Strength Indicator (RSSI) measures the strength of
received radio signal
s
.
Signal Strength:
Strength value of the received signal.
Network Name:
Network name of the network connected to.
Mobile Country Code (MCC):
Mobile country code of the connected
network.
Mobile Network Code (MNC):
Mobile network code of the connected
network.
Cell ID:
ID of the connected base transceiver station.
Transmit:
Displays transmission status and related statistics.
Tx Packets
: Number of IP packets transmitted from the DWR-923.
Tx Errors
: Number of error packets transmitted from the DWR-923.
Tx Overflows
: Number of overflows transmitted from the DWR-923.
Tx Bytes
: Number of bytes transmitted from the DWR-923.
Receive:
Displays receiving status and related statistics.
Rx Packets
: Number of IP packets received by the DWR-923.
Rx Errors
: Number of error packets received by the DWR-923.
Rx Overflows
: Number of overflows received by the DWR-923.
Rx Bytes
: Number of bytes received by the DWR-923.
Clicking Refresh
will renew these data.
Page 14 / 64
13
Internet
PIN Configuration
This page allows configuration of the PIN code of your SIM card.
Use PIN:
Select a PIN code to use to protect your SIM card.
Enable PIN Protection:
Choose to enable or disable PIN protection. If
you choose Yes, you will be asked to enter the PIN code when you use
the phone feature.
Enter PIN:
Enter the PIN code.
Click Verify PIN to proceed.
Page 15 / 64
14
Internet
Radio Configuration
Radio Mode:
Select 3G or 4G for your mobile network or select Auto to
switch between available 3G/4G mobile networks automatically.
Radio Frequency:
Select a radio frequency according to your region
and the frequency your service uses.
19216811.live