Page 16 / 88
Scroll up to view Page 11 - 15
12
D-Link DWR-922 User Manual
Section 3 - Configuration
Enter the PPPoE username provided by your ISP.
Enter the PPPoE password provided by your ISP.
Enter the PPPoE service name provided by your ISP if applicable.
Enter the PPPoE access concentrator (AC) name provided by your
ISP if applicable.
If your ISP provided a static IP address, select
Static IP Address
,
otherwise leave this setting at the default,
Dynamic IP Address
.
If you selected
Static IP Address
above, enter the address
provided by your ISP here.
Maximum Transmission Unit - you may need to change the MTU
for optimal performance with your ISP. The default value is 1500.
Check the box to enable Network Address Translation (NAT).
Check the box to enable IGMP proxy.
Check the box to enable PPPoE passthrough.
Check the box to enable IPv6 passthrough.
Select either
Always On
,
Connect
on Demand
, or
Manual
.
Username:
Password:
PPPoE Service
Name:
AC Name:
IP Control:
Static IP
Address:
MTU:
NAT:
IGMP Proxy:
Enable PPPoE
Passthrough:
Enable IPv6
Passthrough:
Connect Mode
Select:
PPPoE
Page 17 / 88
13
D-Link DWR-922 User Manual
Section 3 - Configuration
Enter a maximum idle time during which the Internet connection
is maintained during inactivity (if you selected
Always On
above,
this setting will have no effect).
Check the box to clone your client’s MAC address to the WAN port.
If your ISP provided DNS server addresses to use, select
Manual
DNS
and enter the primary and (if applicable) secondary
addresses. Otherwise, select
Auto DNS
to automatically assign a
DNS server, or
DNS Disabled
to disable DNS.
Maximum Idle
Time:
Clone MAC:
DNS Mode:
Page 18 / 88
14
D-Link DWR-922 User Manual
Section 3 - Configuration
If you selected
Bridge Mode
, there are no further settings to configure.
Bridge Mode
Page 19 / 88
15
D-Link DWR-922 User Manual
Section 3 - Configuration
PIN Configuration
On this page you can configure your SIM card’s PIN.
To change your SIM’s PIN, enter the new PIN in the
PIN
text field. If you also wish
to enable or disable PIN protection, check
Enable PIN protection
. This will mean
that you have to input your PIN whenever a device using your SIM card is switched
on.
Click
Apply
when you are done.
Page 20 / 88
16
D-Link DWR-922 User Manual
Section 3 - Configuration
Wi-Fi
Check the box to enable the router’s wireless functionality.
Check
Enable
to enable Wi-Fi Protected Setup (WPS).
Displays the current WPS PIN. Click
Generate New PIN
to generate
a new WPS PIN, or
Reset PIN to default
to reset the WPS PIN to its
default value.
Displays the configuration status of WPS. If you want to revert to
unconfigured status, select
Reset to Unconfigured
.
Click this button to connect a wireless device using WPS. See
below for details.
Create a name for your wireless network using up to 32 characters.
Check the box if you do not want to broadcast the SSID of your
wireless network.
Select your country from the drop-down menu.
Wireless
Function Enable:
Wi-Fi Protected
Setup:
Current PIN:
Wi-Fi Protected
Status:
Add Wireless
Device with
WPS:
SSID:
Hide SSID:
Country:
Wireless Setup
On this page you can configure your wireless settings.
19216811.live