Page 36 / 89
Scroll up to view Page 31 - 35
31
D-Link DWR-921 User Manual
Section 3 - Con²guration
This section will help you to change the internal network settings of your router and to con²gure the DHCP Server settings. After modifying any
settings, click
Save Settings
to save your changes.
Network Settings
Enter the IP address you want to use for the router. The default
IP address is
192.168.0.1
. If you change the IP address, you will
need to enter the new IP address in your browser to get into
the con²guration utility.
Enter the
Subnet Mask
of the router. The default subnet mask
is
255.255.255.0
.
Enter the local domain name for your network.
outer IP Address:
Default Subnet Mask:
Local Domain Name:
Router Settings
Page 37 / 89
32
D-Link DWR-921 User Manual
Section 3 - Con²guration
Select this box to enable the DHCP server on your router.
Enter the range of IPs for the DHCP server to use to assign IP
addresses to devices on your network.
Enter lease time for IP address assignments.
Enter the primary DNS IP Address that will be assigned to
DHCP clients.
Enter the secondary DNS IP Address that will be assigned to
DHCP clients.
Enter the primary WINS IP Address that will be assigned to
DHCP clients.
Enter the secondary WINS IP Address that will be assigned to
DHCP clients.
erver:
DHCP IP Address Range:
DHCP Lease Time:
Primary DNS IP Address:
Secondary DNS IP
Address:
Primary WINS IP Address:
Secondary WINS IP
Address:
DHCP Server Settings
The DWR-921 has a built-in DHCP (Dynamic Host Control Protocol) server. The DHCP server assigns IP addresses to devices on the network that
request them. By default, the DHCP Server is enabled on the device. The DHCP address pool contains a range of IP addresses, which is automatically
assigned to the clients on the network. After modifying any settings, click
Save Settings
to save your changes.
Page 38 / 89
33
D-Link DWR-921 User Manual
Section 3 - Con²guration
Message Service
If your ISP provides
SMS
service, you can check and send messages from this page.
Click this button to view SMS messages that you have
received.
Click this button to create a new message to send.
nbox:
Create Message:
Deletes the selected SMS message.
Opens a Create Message window to reply to the selected SMS
message.
Opens a Create Message windows to forward the selected SMS
message to another recipient.
Click this button to check for new messages.
e:
Reply:
Forward:
Refresh:
SMS Inbox
This page shows all messages that are stored on the SIM card. Select a message to display its contents in the SMS window. After you read it, you
can delete it, or reply to the sender. Click the
Refresh
button to update the list.
Page 39 / 89
34
D-Link DWR-921 User Manual
Section 3 - Con²guration
Create Message
This page allows you to send an SMS to your contacts. Just ²ll in the phone number of the recipient, and type the content of message. Then push
the “Send Message” button to send out this message. If you would like to add more than one recipient, you must put a semicolon (;) between each
of the phone numbers.
Type the phone number of the recipient.
Type the message that you would like to send.
Click this button to send the message.
Click this button to clear the message.
eceiver:
Text Message:
Send Message:
Cancel:
Page 40 / 89
35
D-Link DWR-921 User Manual
Section 3 - Con²guration
Advanced
The device can be con²gured as a virtual server so that users can access services such as Web or FTP via the public (WAN) IP address of the router.
You can also allow the settings to run on a speci²ed schedule. The Virtual Server function is also known as Port Forwarding. After modifying any
settings, click
Save Settings
to save your changes.
This contains a list of pre-de²ned services. You can select a
service, select a rule ID, then click the
Copy to
button to copy
the default settings for that service to the speci²ed rule ID.
Speci²es which rule to copy the selected
Well known service
settings to when you click the
Copy to
button.
Select a schedule to use and copy to the speci²ed rule ID
when you click the
Copy to
button. You may select
Always On
or use a speci²c schedule that you have de²ned. To create and
edit schedules, please refer to “Schedules” on page 55.
ell-known Services:
ID:
Use schedule rule:
Virtual Server
The
ADVANCED
pages allow you to con²gure the more advanced settings of the router, such
as Virtual Server(Port Forwarding), MAC and URL ²ltering, and advanced wireless and network
settings. To view the Advanced con²guration pages, click on
ADVANCED
at the top of the
screen.
19216811.live