16

D-Link DWR-921 User Manual

Section 3 - Con²guration

The default setting of PPPoE is 1492.

The device will automatically reconnect to your PPPoE

connection automatically.

aximum Transmission

Unit (MTU):

Auto-reconnect:

17

D-Link DWR-921 User Manual

Section 3 - Con²guration

PPTP

Choose this Internet connection if your ISP provides you with a PPTP account. After modifying any settings, click

Save Settings

to save your changes.

Choose Static IP only if your ISP assigns you an IP address.

Otherwise, please choose Dynamic IP.

Enter the information provided by your ISP.

(Only applicable for Static IP PPTP.)

Enter the information provided by your ISP.

(Only applicable for Static IP PPTP.)

Enter the information provided by your ISP.

(Only applicable for Static IP PPTP.)

IP address of PPTP server.

User/account name that your ISP provides to you for PPTP dial-

up.

Password that your ISP provides to you for PPTP dial-up.

Re-enter your password for veri²cation.

Choose

Always-on

when you want to establish PPTP

connection all the time. If you choose

Connect-on-demand

,

the device will establish a PPTP connection when local users

want to surf Internet, and disconnect if there is no tra´c after

the time period de²ned by the

Maximum Idle Time

setting.

ddress Mode:

PPTP IP Address:

PPTP Subnet Mask:

PPTP Gateway IP Address:

PPTP Server IP Address:

Username:

Password:

Verify Password:

Reconnect Mode:

18

D-Link DWR-921 User Manual

Section 3 - Con²guration

The time of no activity to disconnect your PPTP session. Set it

to zero or choose Always-on to disable this feature.

aximum Idle Time:

19

D-Link DWR-921 User Manual

Section 3 - Con²guration

L2TP

Choose this Internet connection if your ISP provides you with an L2TP account. After modifying any settings, click

Save Settings

to save your changes.

Choose Static IP only if your ISP assigns you an IP address.

Otherwise, please choose Dynamic IP.

Enter the information provided by your ISP.

(Only applicable for Static IP L2TP.)

Enter the information provided by your ISP.

(Only applicable for Static IP L2TP.)

Enter the information provided by your ISP.

(Only applicable for Static IP L2TP.)

IP address of L2TP server.

User/account name that your ISP provides to you for L2TP dial-

up.

Password that your ISP provides to you for L2TP dial-up.

Fill in with the same password in Password ²eld.

Choose Always-on when you want to establish L2TP

connection all the time. Choose Connect-on-demand the

device will establish L2TP connection when local users want to

surf Internet, and disconnect if no tra´c after time period of

Maximum Idle Time.

The time of no activity to disconnect your L2TP session. Set it

to 0 or choose Always-on to disable this feature.

ddress Mode:

L2TP IP Address:

L2TP Subnet Mask:

L2TP Gateway IP Address:

L2TP Server IP Address:

Username:

Password:

Verify Password:

Reconnect Mode:

Maximum Idle Time:

20

D-Link DWR-921 User Manual

Section 3 - Con²guration

Choose whether the DWR-921 should only use 4G networks,

3G networks, or use Auto Mode to automatically select a

network.

Fill in a name to identify the following 3G/4G con²guration.

Select your country and telecom to automatically ²ll in some

of the required settings.

(Optional) Fill in only if requested by ISP.

(Optional) Fill in only if requested by ISP.

Enter the number to be dialed.

Select PAP, CHAP, or Auto detection. The default authentication

method is Auto.

(Optional) Enter the APN information.

Enter the PIN associated with your SIM card.

Select Auto or Manual to decide whether the routher should

reconnect to your 3G/4G network automatically or manually.

Set the maximum time your connection can be idle before

disconnecting. Set it to 0 or choose Auto in Reconnect Mode

to disable this feature.

refer Service Type:

Account/Pro±le Name:

Country/Telecom:

Username:

Password:

Dialed Number:

Authentication:

APN:

Pin Code:

Reconnect Mode:

Maximum Idle Time:

3G/4G

Choose this Internet connection if you already use a SIM card for 3G/4G Internet service from your mobile service company. The ²elds here may

not be necessary for your connection. The information on this page should only be used if required by your service provider. After modifying any

settings, click

Save Settings

to save your changes.