Page 36 / 88
Scroll up to view Page 31 - 35
31
D-Link DWR-921 User Manual
Section 3 - Configuration
WPS Status:
This will show the current WPS connection process status. Click
the
Trigger
button to initiate a WPS connection.
Page 37 / 88
32
D-Link DWR-921 User Manual
Section 3 - Configuration
This section will help you to change the internal network settings of your router and to configure the DHCP Server settings. After modifying any
settings, click
Save Settings
to save your changes.
Network Settings
Enter the IP address you want to use for the router. The default
IP address is
192.168.0.1
. If you change the IP address, you will
need to enter the new IP address in your browser to get into
the configuration utility.
Enter the
Subnet Mask
of the router. The default subnet mask
is
255.255.255.0
.
Enter the local domain name for your network.
Router IP Address:
Default Subnet Mask:
Local Domain Name:
Router Settings
Page 38 / 88
33
D-Link DWR-921 User Manual
Section 3 - Configuration
Select this box to enable the DHCP server on your router.
Enter the range of IPs for the DHCP server to use to assign
IP addresses to devices on your network. These values will
represent the last octet of the IP addresses in the pool.
Enter the lease time for IP address assignments.
Enter the primary DNS IP address that will be assigned to
DHCP clients.
Enter the secondary DNS IP address that will be assigned to
DHCP clients.
Enter the primary WINS IP address that will be assigned to
DHCP clients.
Enter the secondary WINS IP address that will be assigned to
DHCP clients.
Enable DHCP Server:
DHCP IP Address Range:
DHCP Lease Time:
Primary DNS IP Address:
Secondary DNS IP
Address:
Primary WINS IP Address:
Secondary WINS IP
Address:
DHCP Server Settings
The DWR-921 has a built-in DHCP (Dynamic Host Control Protocol) server. The DHCP server assigns IP addresses to devices on the network that
request them. By default, the DHCP Server is enabled on the device. The DHCP address pool contains a range of IP addresses, which are automatically
assigned to the clients on the network. After modifying any settings, click
Save Settings
to save your changes.
Page 39 / 88
34
D-Link DWR-921 User Manual
Section 3 - Configuration
Message Service
If your ISP provides
SMS
service, you can check and send messages from this page.
Click this button to view SMS messages that you have
received.
Click this button to create a new message to send.
SMS Inbox:
Create Message:
Deletes the selected SMS message.
Opens a Create Message window to reply to the selected SMS
message.
Opens a Create Message windows to forward the selected SMS
message to another recipient.
Click this button to check for new messages.
Delete:
Reply:
Forward:
Refresh:
SMS Inbox
This page shows all messages that are stored on the SIM card. Select a message to display its contents in the SMS window. After you have read a
message, you can delete it, or reply to the sender. Click the
Refresh
button to update the list.
Page 40 / 88
35
D-Link DWR-921 User Manual
Section 3 - Configuration
Create Message
This page allows you to send an SMS to your contacts. Just fill in the phone number of the recipient, and type the content of the message. Then
click the “Send Message” button to send out the message. If you would like to add more than one recipient, you must put a semicolon (;) between
each of the phone numbers.
Type the phone number of the recipient.
Type the message that you would like to send.
Click this button to send the message.
Click this button to clear the message.
Receiver:
Text Message:
Send Message:
Cancel:
19216811.live