16

D-Link DWR-921 User Manual

Section 3 - Configuration

The default setting of PPPoE is 1492.

The device will automatically reconnect to your PPPoE

connection automatically.

Maximum Transmission

Unit (MTU):

Auto-reconnect:

17

D-Link DWR-921 User Manual

Section 3 - Configuration

PPTP

Choose this Internet connection if your ISP provides you with a PPTP account. After modifying any settings, click

Save Settings

to save your changes.

Choose Static IP only if your ISP assigns you an IP address.

Otherwise, please choose Dynamic IP.

Enter the information provided by your ISP

(Only applicable for Static IP PPTP).

Enter the information provided by your ISP

(Only applicable for Static IP PPTP).

Enter the information provided by your ISP

(Only applicable for Static IP PPTP).

IP address of PPTP server.

User/account name that your ISP provides to you for PPTP dial-

up.

Password that your ISP provides to you for PPTP dial-up.

Re-enter your password for verification.

Choose

Always-on

when you want to establish PPTP

connection all the time. If you choose

Connect-on-demand

,

the device will establish a PPTP connection when local users

want to connect to the Internet, and disconnect if there is no

traffic after the time period defined by the

Maximum Idle

Time

setting.

Address Mode:

PPTP IP Address:

PPTP Subnet Mask:

PPTP Gateway IP Address:

PPTP Server IP Address:

Username:

Password:

Verify Password:

Reconnect Mode:

18

D-Link DWR-921 User Manual

Section 3 - Configuration

The time of no activity to disconnect your PPTP session. Set it

to zero or choose

Always-on

to disable this feature.

Maximum Idle Time:

19

D-Link DWR-921 User Manual

Section 3 - Configuration

L2TP

Choose this Internet connection if your ISP provides you with an L2TP account. After modifying any settings, click

Save Settings

to save your changes.

Choose

Static IP

only if your ISP assigns you an IP address.

Otherwise, please choose

Dynamic IP

.

Enter the information provided by your ISP

(Only applicable for Static IP L2TP).

Enter the information provided by your ISP

(Only applicable for Static IP L2TP).

Enter the information provided by your ISP

(Only applicable for Static IP L2TP).

IP address of L2TP server.

User/account name that your ISP provides to you for L2TP dial-

up.

Password that your ISP provides to you for L2TP dial-up.

Re-type your password in this field.

Choose

Always-on

when you want to establish L2TP

connection all the time. If you choose

Connect-on-demand

the device will establish L2TP connection when local users

want to use Internet, and disconnect if no traffic after time

period of Maximum Idle Time.

The time of no activity to disconnect your L2TP session. Set it

to 0 or choose

Always-on

to disable this feature.

Address Mode:

L2TP IP Address:

L2TP Subnet Mask:

L2TP Gateway IP Address:

L2TP Server IP Address:

Username:

Password:

Verify Password:

Reconnect Mode:

Maximum Idle Time:

20

D-Link DWR-921 User Manual

Section 3 - Configuration

Choose whether the DWR-921 should only use 4G networks,

3G networks, or use

Auto Mode

to automatically select a

network.

Select

Auto-Detection

to have the router automatically detect

the settings for your connection. Select

Manual

to enter the

details of your connection manually.

Fill in a name to identify the following 3G/4G configuration.

Select your country and service provider to automatically fill in

some of the required settings.

Fill in only if requested by ISP (optional).

Fill in only if requested by ISP (optional).

Enter the number to be dialed.

Select

PAP

,

CHAP

, or

Auto

detection. The default

authentication method is

Auto

.

Enter the APN information (optional).

Enter the PIN associated with your SIM card.

Select

Auto

or

Manual

to determine whether the router

should reconnect to your 3G/4G network automatically or

manually.

Prefer Service Type:

Dial Up Profile:

Account/Profile Name:

Country/Telecom:

Username:

Password:

Dialed Number:

Authentication:

APN:

Pin Code:

Reconnect Mode:

3G/4G

Choose this Internet connection if you already use a SIM card for 3G/4G Internet service from your mobile Internet service provider. The fields here

may not be necessary for your connection. The information on this page should only be used if required by your service provider. After modifying

any settings, click

Save Settings

to save your changes.