12

D-Link DWR-113 User Manual

Section 3 - Configuration

Manual Internet Connection Setup

Click

Manual Internet Connection Setup

to begin.

If you want to configure your router to connect to the Internet using the

wizard, click

Internet Connection Setup Wizard

and refer to page 9.

13

D-Link DWR-113 User Manual

Section 3 - Configuration

Several different Internet Connection types can be selected depending upon the specifications of your Internet Service Provider (ISP).

Select the Internet Connection type

specified by your Internet Service

Provider (ISP). The corresponding

settings will be displayed below.

Please see the following pages for

details on how to configure these

different connection types.

This connection can serve as a

backup for your default connection.

Enter the name of the Internet

host to be used as the backup

connection.

Enter the primary DNS server.

Enter the secondary DNS server.

Set the MTU (the default value is

1500).

Manually enter the MAC address or

click

Clone

to copy the PC’s MAC

address.

Tick this check box to enable auto-

reconnect.

Internet Connection

Internet Connection Type

My Internet Connection is:

Failover Internet

Connection is:

Host Name:

Primary DNS Server:

Secondary DNS Server:

MTU:

MAC Address:

Auto-reconnect:

14

D-Link DWR-113 User Manual

Section 3 - Configuration

Dynamic IP (DHCP)

(Optional) Required by some ISPs.

(Optional) Fill in with IP address of primary DNS

server.

(Optional) Fill in with IP address of secondary DNS

server.

You may need to change the Maximum Transmission

Unit (MTU) for optimal performance. The default

value is 1500.

The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router.

It is not recommended that you change the default MAC address unless required by your ISP.

You can use

the

Clone Your PC’s MAC Address

button to replace the Internet port’s MAC address with the MAC address

of your PC.

This feature enables this product to renew WAN IP address automatically when the lease time is expiring.

Click

Save Settings

to save your changes, or click

Don’t Save Settings

to discard your changes.

This section will help you to obtain IP Address information automatically from your ISP. Use this option if your ISP didn’t provide you with

IP Address information and/or a username and password.

Host Name:

Primary DNS Server:

Secondary DNS Server:

MTU (Maximum

Transmission Unit):

MAC Address:

Auto-reconnect:

15

D-Link DWR-113 User Manual

Section 3 - Configuration

PPPoE

Choose this Internet connection if your ISP provides you PPPoE account.

The username/account name that your ISP provides

to you for PPPoE dial-up.

Password that your ISP provides to you for PPPoE

dial-up.

Fill in with the same password in Password field.

(Optional) Fill in if provided by your ISP.

(Optional) Fill in if provided by your ISP. If not, keep

the default value.

(Optional) Fill in if provided by your ISP. If not, keep

the default value.

(Optional) Fill in if provided by your ISP. If not, keep the default value.

MAC address of WAN interface. You can also copy MAC address of your PC to its WAN interface by pressing

Clone Your PC’s MAC

button. The

Restore MAC

button will reset the router to its default MAC address.

The amount of time of inactivity before disconnecting established PPPoE session. Set it to zero or enable

Auto-reconnect will disable this feature.

The default setting of PPPoE is 1492.

The device will dial-up PPPoE connection automatically.

Click

Save Settings

to save your changes, or click

Don’t Save Settings

to discard your changes.

Username:

Password:

Verify Password:

Service Name:

IP Address:

Primary DNS Server:

Secondary DNS Server:

MAC Address:

Maximum Idle Time:

Maximum Transmission

Unit (MTU):

Auto-reconnect:

16

D-Link DWR-113 User Manual

Section 3 - Configuration

PPTP

Choose this Internet connection if your ISP provides you PPTP account.

Choose Static IP only if your ISP assigns you an IP

address. Otherwise, please choose Dynamic IP.

Enter the information provided by your ISP.

(Only applicable for Static IP PPTP.)

Enter the information provided by your ISP.

(Only applicable for Static IP PPTP.)

Enter the information provided by your ISP.

(Only applicable for Static IP PPTP.)

IP address of PPTP server.

User/account name that your ISP provides to you for PPTP dial-up.

Password that your ISP provides to you for PPTP dial-up.

Fill in with the same password in Password field.

Choose

Always-on

when you want to establish PPTP connection all the time. If you choose

Connect-on-

demand

,

the device will establish PPTP connection when local users want to surf Internet, and disconnect if

no traffic after time period of Maximum Idle Time.

The time of no activity to disconnect your PPTP session. Set it to zero or choose Always-on to disable this

feature.

Click

Save Settings

to save your changes, or click

Don’t Save Settings

to discard your changes.

Address Mode:

PPTP IP Address:

PPTP Subnet Mask:

PPTP Gateway IP Address:

PPTP Server IP Address:

Username:

Password:

Verify Password:

Reconnect Mode:

Maximum Idle Time: