2

D-Link DWR-113 User Manual

Section 1 - Product Overview

Introduction

The D-Link 3G Wi-Fi Router allows users to access worldwide mobile broadband networks. Once connected, users

can transfer data and stream media. Simply connect your USB

modem and share your 3G Internet connection

through a secure 802.11n wireless network or using the 10/100 Ethernet port.

The 3G Wi-Fi Router can be installed quickly and easily almost anywhere. This router is great for situations where

an impromptu wireless network must be set up, or wherever conventional network access is unavailable. The

DWR-113 can even be installed in buses, trains, or boats, allowing passengers to check e-mail or chat online while

commuting.

3

D-Link DWR-113 User Manual

Section 1 - Product Overview

Hardware Overview

Back Panel

Port

Function

USB Port

Connects to a USB modem.

LAN Port

Connects to wired computers or devices.

WAN Port

Connects to the Internet.

Power Port

Connects to the power adapter.

USB

LAN 4

LAN 3

LAN 2

LAN 1

WAN

POWER

4

D-Link DWR-113 User Manual

Section 1 - Product Overview

Hardware Overview

Front Panel and LEDs

3G

WAN

Wi-Fi

LAN

LAN

LAN

LAN

WPS BUTTON

RESET BUTTON

LED

Description

Color

Solid

Blinking

Blinking (Fast)

3G

Green

3G connection established

Data transmitting

-

WAN

Green

WAN connection established

Data transmitting

-

Wi-Fi

Green

Wi-Fi active and available

Data transmitting

Device in WPS

mode

LAN 1 - LAN 4

Green

Ethernet connection established

Data transmitting

-

5

D-Link DWR-113 User Manual

Section 2 - Installation

Installation

This section will guide you through the installation process. Placement of the router is very important. Do not place the router in an enclosed

area such as a closet, cabinet, or in an attic or garage.

Connect to Your Network

Note:

Ensure that your DWR-113 3G Wi-Fi Router is disconnected and powered

off

before performing the installation steps below.

1. Connect a USB modem to the

USB

port on the back of the router.

2. Insert a LAN network cable into the

LAN

port on the back of the router. Plug the other end of the LAN cable into the LAN port of your

computer or laptop. The Ethernet LED will turn green if the Ethernet connection is successfully established.

Note:

The DWR-113 3G Wi-Fi Router LAN Port is “Auto-MDI/MDIX.” Therefore, patch or crossover Ethernet cables can be used.

3. Configure the device using the setup utility.

6

D-Link DWR-113 User Manual

Section 2 - Installation

Wireless Installation Considerations

The DWR-113 can be accessed using a wireless connection from virtually anywhere within the operating range of your wireless network.

Keep in mind, however, that the quantity, thickness and location of walls, ceilings, or other objects that the wireless signals must pass

through, may limit the range. Ranges vary depending on the types of materials and background RF (radio frequency) noise in your home

or office. The key to maximizing the wireless range is to follow these basic guidelines:

1. Minimize the number of walls and ceilings between the D-Link router and other network devices. Each wall or ceiling can

reduce your adapter’s range from 3 to 90 feet (1 to 30 meters).

2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (0.5 meters), at a 45-degree angle

appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick. Position devices

so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.

3. Try to position access points, wireless routers, and computers so that the signal passes through open doorways and

drywall. Materials such as glass, metal, brick, insulation, concrete and water can affect wireless performance. Large

objects such as fish tanks, mirrors, file cabinets, metal doors and aluminum studs may also have a negative effect on

range.

4. If you are using 2.4 GHz cordless phones, make sure that the 2.4 GHz phone base is as far away from your wireless

device as possible. The base transmits a signal even if the phone in not in use. In some cases, cordless phones, X-10

wireless devices, and electronic equipment such as ceiling fans, fluorescent lights, and home security systems may

dramatically degrade wireless connectivity.