Page 21 / 34
Scroll up to view Page 16 - 20
21
Using the Configuration Menu (continued)
Status > Device Info
This window displays
the settings of the
DWL-G820, as well
as the Firmware
version, and the
MAC address.
Help
At this window you
can access the
help screens for
the topics listed.
Page 22 / 34
22
Troubleshooting
If you are not using a DHCP capable router, or you need to assign a static IP address,
please follow these instructions:
This section provides solutions to situations that can occur during the installation and
operation of the DWL-G820 Wireless Gaming Adapter.
1. How do I assign a static IP address in Windows XP/2000?
Please note that routers will automatically assign IP addresses to the computers on the
network, using DHCP (Dynamic Host Configuration Protocol) technology. If you are using
a DHCP-capable router you will not need to assign static IP addresses.
Click on
Control Panel.
Go to
Start.
Double-click on
Network Connections.
Page 23 / 34
23
Troubleshooting (continued)
How do I assign a Static IP Address in Windows XP/2000?
(continued)
Click
Internet Protocol
(TCP/IP)
.
D-Link DWL-G650
Click
Properties
.
Right-click on
Local Area
Connections
.
Click
Properties
.
Page 24 / 34
24
Troubleshooting (continued)
How do I assign a Static IP Address in Windows XP/2000?
(continued)
Select
Use the following IP
address
.
Enter the
IP address
.
Enter the
Subnet mask
.
Enter the
Default Gateway
.
The Default Gateway is the
LAN IP address of the
wireless router.
D-Link
wireless routers have a
LAN
IP address of 192.168.0.1
Select
Use the following
DNS server address.
Enter
the LAN IP address of the
wireless router. (D-Link
wireless routers have a LAN
IP address of 192.168.0.1)
The IP addresses on your network must be
within the same range. For example, if one
computer has an IP address of 192.168.0.2,
the other computers should have IP
addresses that are sequential, like 192.168.0.3 and
192.168.0.4. The subnet mask must be the same for all
the computers on the network.
Click
OK
.
You have completed the assignment of a static IP address in Windows XP/2000!
Page 25 / 34
25
Troubleshooting (continued)
2. How do I assign a static IP address in Macintosh OSX?
Go to the
Apple Menu
and select
System Preferences.
Click
Network
.
Select
Built-in Ethernet
in
the
Show
pull-down menu.
Select
Manually
in the
Configure
pull-down menu.
Input the static IP address, the
subnet mask and the router IP
address in the appropriate fields.
You have completed the assignment of a
static IP address in Macintosh OS X!
Click
Apply Now
.
19216811.live