Page 36 / 40
Scroll up to view Page 31 - 35
36
3.
Check that the drivers for the network adapters are installed properly.
Troubleshooting (continued)
You may be using different network adapters than those illustrated here, but this
procedure will remain the same, regardless of the type of network adapters you are
using.
Go to
Start
.
Right-click on
My Computer
.
Click
Properties
.
Select the
Hardware Tab
.
Click
Device Manager
.
Page 37 / 40
37
Troubleshooting (continued)
Double-click
on
Network
adapters
.
Right-click
on
D-Link
Air
DWL-650 Wireless
Cardbus Adapter
(or whatever network adapter
you are using).
Select
Properties
to check that
the drivers are installed properly.
Click
OK
.
Look
under
Device Status
to
check that the device is
working properly.
D-Link
Air
DWL-650 Wireless Cardbus Adapter
D-Link
Air
DWL-650 Wireless Cardbus Adapter
D-Link
Air
DWL-650 Wireless Cardbus Adapter
Cardbus
Page 38 / 40
38
Troubleshooting (continued)
4.
Resetting the DWL-700AP to Factory Default Settings
After you have tried other methods for troubleshooting your network, you may
choose to reset the DWL-700AP to the factory default settings. Remember that
D-Link
Air
products network together, out of the box, at the factory default settings.
To hard-reset the D-Link
Air
DWL-700AP to the factory default settings, please do
the following:
Locate the
reset
button on the back of the DWL-700AP
Use a paper clip to press the
reset
button
Hold for about 5 seconds and then release
After the DWL-700AP reboots (this may take a few minutes) it will be reset
to the factory default settings.
Page 39 / 40
39
Technical Specifications
IEEE 802.11
!
Standards
Port:
10/100 Mbps Fast Ethernet
!
IEEE 802.11b
!
IEEE 802.3
!
IEEE 802.3u
!
1, 2, 5.5, 11Mbps (with Automatic Fallback)
!
Data Rates:
Supports 64-,128-bit WEP
Encryption:
!
Media Access Controll:
CSMA/CA with ACK
!
2.4 – 2.462GHz
!
Frequency Range:
Operating Range:
Indoors - up to 328 feet
(100 meters)*
!
Modulation Technology:
DSSS - Direct Sequence Spread Spectrum
!
11-chip Barker sequence
!
Page 40 / 40
40
Barker (1Mbps/0db)
!
Barker (2Mbps/3db)
!
CCK (5.5Mbps/5.5db)
CCK (11Mbps/8.5db)
5% - 95%, non-condensing
Humidity:
!
Modulation Techniques
!
!
Technical Specifications
(continued)
15dBm +/- 2dB
Transmitter Output Power:
!
Operating Temperature:
32ºF to 131ºF (0ºC to 55ºC
)
!
Power (Green)
Link (Green)
TX/RX (Green)
LEDs:
!
!
!
Power Input:
External Power
Supply: DC 5V, 2.4A
!
Warranty:
1 Year
!
Weight:
.44 lbs. (200g)
!
Safety & Emissions
FCC
UL
!
!
Device Management
Web-Based - Internet
Explorer v5 or later;
Netscape Navigator v4 or
later; or other Java-enabled
browsers.
!
Tolerates up to +17dBm at
the Antenna
Over-Driving Levels:
!
External Antenna Type:
2.5dB gain with reverse SMA
connector
!
L = 5.5 inches
(140mm)
W = 4.5 inches
(114mm)
H = 1 inches
(25.4mm)
Physical Dimensions:
!
!
!
19216811.live