16

Using the Configuration Utility (continued)

Advanced > Filters

Use

MAC Filters

to allow or deny computers by their MAC Addresses from access-

ing the DWL-700AP. You can either manually add a MAC Address or select the MAC

Address from the list of clients that are currently connected to the broadband router

(

Connected PCs

). The default setting is

Disabled MAC Filters

.

MAC Filter List:

This list will display the MAC Addresses that are in the selected

filter.

17

Save Settings:

The

current system set-

tings can be saved as

a file onto the local

hard drive.

Load Settings:

The

saved file or any other

saved setting file can

be loaded back on the

access point. To re-

load a system settings

file, click on

Browse

to browse the local

hard drive and locate

the system file to be

used. Click

Load

when you have selected the file to be loaded back onto the

access point

.

Reset:

To complete the reset, click

Reset

.

Using the Configuration Utility (continued)

Tools > Admin

New Password:

Enter the new

password.

Confirm

Password:

Re-enter

the password to

confirm it.

Tools > System

Restore:

You may also restore the factory settings by clicking on

Restore

. Make sure

to save the unit’s settings before clicking on

Restore

.

18

Using the Configuration Utility (continued)

Tools > Firmware

Click on

Click here

to check for the

latest firmware...

.

Download the latest

firmware to your hard

drive. Then click

Browse

on this page

to find the firmware

upgrade on your hard

drive.

Click

Apply

to start

the firmware upgrade.

Status > Device Info

This screen displays the current wireless and Ethernet settings of the DWL-700AP.

19

Using the Configuration Utility (continued)

Status > Log

View Log

The access point keeps a running log of events and activities occurring on the AP. If the

device is rebooted, the logs are automatically cleared.

First Page

- The first page of the log.

Last Page

- The last page of the log.

Previous

- Moves back one log page.

Next

- Moves forward one log page.

Clear

- Clears the logs completely.

20

Using the Configuration Utility (continued)

Status> Stats

Traffic Statistics

The access point keeps traffic

statistics. You are able to view the

statistics of the router on both the

Ethernet portion of the network and

the wireless portion of the network.

The traffic counter will reset if the

device is rebooted.

Status > Wireless

Connected

Wireless PCs LIst

This list displays the MAC

Addresses of connected PC’s and

the length of time that they have

been connected.

Help

Select from this menu for extra

help.

Menu

DWL-700AP