D-Link DWL-3150 Router Manual PDF (Setup & Configuration Guide)

Page 31 / 71 Scroll up to view Page 26 - 30

31

D-Link DWL-3150 User Manual

Section ² - Using the Conﬁguration Menu

WPA & WPA2 Personal

Wi-Fi Protected Access authorizes and

authenticates users onto the wireless

network. WPA uses stronger security than

WEP and is based on a key that changes

automatically at a regular interval. It

requires a RADIUS server in the network.

WPA and WPA2 uses different algorithm.

WPA-Auto allows both WPA and WPA2.

S

elect TKIP or AES from the pull-down

menu.

Enter a passphrase. The passphrase is an

alpha-numeric password between 8 and 63

characters long. The password can include

symbols (!?*&_) and spaces. Make sure you

enter this key exactly the same on all other

wireless clients.

Re-enter the passphrase once more for

conﬁrmation.

Authentication:

Cipher Type:

PassPhrase:

Conﬁrm PassPhrase:

Page 32 / 71

3±

D-Link DWL-3150 User Manual

Section ² - Using the Conﬁguration Menu

WPA & WPA2 Enterprise

Wi-Fi Protected Access authorizes and

authenticates users onto the wireless network.

WPA uses stronger security than WEP and is

based on a key that changes automatically at

a regular interval. It requires a RADIUS server

in the network. WPA and WPA2 uses different

algorithm. WPA-Auto allows both WPA and

WPA2.

S

elect TLS, TTLS or PEAP from the

pull-down menu.

S

elect TKIP or AES from the pull-down

menu.

Client and server authenticate each other

using digital certiﬁcates. Client generates

a pre-master secret key by encrypting a

random number with the server’s public key

and sends it to the server.

Certificate Authority (Ex: Microsoft

Certification, Bank Certification…etc).

Upload the Client certificate for client

recognition.

Client Authentication (Ex: The certiﬁcation

from Radius Server use in client device).

EAP private key data use in wireless

connection.

Authentication:

EAP Type:

Cipher Type:

EAP Secret:

CA Certiﬁcation:

Client Certiﬁcation:

Private Key

Certiﬁcation:

Page 33 / 71

33

D-Link DWL-3150 User Manual

Section ² - Using the Conﬁguration Menu

LAN

Assign a static IP address that is within

the IP address range of your network.

Enter the subnet mask. All devices

in the network must share the same

subnet mask.

DHCP stands for Dynamic Host Control

Protocol. The DHCP server assigns IP

addresses to devices on the network

that request them. These devices

must be set to “Obtain the IP address

automatically”. By default, the DHCP

Server is enabled on the DWL-3150

when you select

Wireless WAN

mode.

The DHCP address pool contains

the range of the IP address that will

automatically be assigned to the clients

on the network.

The starting and ending IP address for

the DHCP server’s IP assignment.

The Lease Time is the period of time

before the DHCP server will assign new

IP addresses.

Enter the domain name, if applicable. An example of a domain name is: www.dlink.com.

When DNS Relay is enabled, DHCP clients of the router will be assigned the router’s LAN IP address as their DNS server.

All DNS requests that the router receives will be forwarded to your ISPs DNS servers. When DNS relay is disabled, all

DHCP clients of the router will be assigned the ISP DNS server.

IP Address:

Subnet Mask:

Enable DHCP

Server:

DHCP IP Address

Range:

DHCP Lease

Time:

Local Domain

Name:

Enable DNS

Relay:

Page 34 / 71

3²

D-Link DWL-3150 User Manual

Section ² - Using the Conﬁguration Menu

Enable DHCP

Reservation:

Computer Name:

IP Address:

MAC Address:

DHCP

Reservation List:

Dynamic DHCP

Client List:

DHCP Reservations allow the router to assign the same IP address to a speciﬁc device on your network. The speciﬁed

device will get the same DHCP IP address information every time it is turned on or requests an IP address. No other

computer on your network will receive the speciﬁed static DHCP address. DHCP Reservations are very helpful when

used for server computers on your network that are hosting applications such as Web and FTP.

Select Enabled to conﬁgure a DHCP Reservation. If you wish to disable this DHCP Reservation at a later date, click the edit

icon next to the entry in the DHCP Reservation List, select the Disabled radio button, and then click Save Settings.

Client computers with DHCP Reservations will have their information displayed in the DHCP Reservations List. The table

will show the Host Name, IP Address, MAC Address, and Expired Time of the DHCP lease for each client computer.

The Hostname of the network device you are conﬁguring DHCP Reservation for.

Enter the last octet of the IP address that you are conﬁguring the network device to always obtain.

Enter the MAC address of the network device you are conﬁguring a DHCP Reservation for.

This is a list of the computers or other devices for which you have created reserved DHCP entries. You can enable

and disable entries with the Enabled checkbox. A DHCP Reservation entry can be changed by clicking the Edit

icon, or deleted by clicking the Delete icon. When you click the Edit icon, the item is highlighted, and the “DHCP

Reservations” section is activated for editing.

In this section you can see what LAN devices are currently leasing IP addresses.

Page 35 / 71

35

D-Link DWL-3150 User Manual

Section ² - Using the Conﬁguration Menu

Performance

Home > Advanced Settings

Select

Mixed

,

11g Only

, or

11b Only

.

A pull-down menu to select the

maximum wireless signal rate for the

selected device(s).

Beacons are packets sent by an access

point to synchronize a network. Specify

the beacon value for the selected

device(s) here. The default value of

100

is recommended.

DTIM (Delivery Traffic Indication

Message) is a countdown informing

clients of the next listening window for

broadcast and multicast messages.

This sets the fragmentation threshold

(speciﬁed in bytes). Packets exceeding

the value set here will be fragmented.

The default is

2346

.

The RTS value should not be changed

unless you encounter inconsistent data

ﬂow. The default value is

2346

.

Choose

full

,

half (-3dB)

,

quarter (-6dB)

,

eighth (-9dB)

,

minimum power.

The DWL-3150 supports 2.4GHz radio with two antennas. Radio is connected to each antenna and supports auto

diversity mode by default. This means that the access point will auto switch to the antenna with better RSSI value.

Diversity: The DWL-3150 will auto switch to the antenna with better RSSI value.

Wireless B/G Mode:

Data Rate (11b/g):

Beacon Interval:

DTIM Interval:

Fragmentation:

RTS Threshold:

Transmit Power:

Antenna Diversity:

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share