Page 51 / 71
Scroll up to view Page 46 - 50
51
D-Link DWL-3150 User Manual
Section ² - Using the Configuration Menu
Administrator Settings
Tool
Enter an IP address that will be
allowed for the administrator to login.
Enter the 2nd IP address that will
be allowed for the administrator to
login.
You can customize user name as
an administrator of DWL-3150. The
default username is “admin” with no
password configured.
Enter the old password.
Enter a password in this field. The
password is case-sensitive. “A” is
a different character than “a.” The
length should be between 0 and 12
characters.
Type the password again to confirm it.
Enable or disable console.
Select the time out period.
Enable or disable SNMP.
Enter the security user name.
Choose MD5 or SHA1.
Choose DES or AES.
Limit Administrator IP:
User Name:
Old Password:
New Password:
Confirm New Password:
Console Settings Status:
Timeout:
SNMP Status:
Security User Name:
Authentication Protocol:
Privacy Protocol:
Page 52 / 71
5±
D-Link DWL-3150 User Manual
Section ² - Using the Configuration Menu
Firmware Upgrade
You can upgrade the firmware of the
device using this tool. Make sure
that the firmware you want to use
is saved on the local hard drive of
the computer. Click on Browse to
search the local hard drive for the
firmware to be used for the update.
Upgrading the firmware will not
change any of your system settings
but it is recommended that you
save your system settings before
doing a firmware upgrade. Please
check the D-Link support site for
firmware updates at http://support.
dlink.com/.
Upload Firmware
From File:
Page 53 / 71
53
D-Link DWL-3150 User Manual
Section ² - Using the Configuration Menu
Configuration File Upload and Download
Browse to the saved configuration
file you have in local drive and click
open and upload to update the
configuration.
Click download to save the current
configuration file to your local disk.
Note that if you save one configuration
with administrator’s password now,
after reset your, and then update
to this saved configuration file, the
password will be gone.
Upload
Configuration File:
Load Settings to
Local Hard Drive:
Page 54 / 71
5²
D-Link DWL-3150 User Manual
Section ² - Using the Configuration Menu
NTP Settings
Displays the current NTP settings.
Enter the NTP server IP, or choose
from the drop-down menu.
Select your time zone from the
drop-down menu.
Check the box to enable daylight
savings time.
NTP Information:
NTP Server IP:
NTP Time Zone:
Daylight Saving
Time:
Page 55 / 71
55
D-Link DWL-3150 User Manual
Section ² - Using the Configuration Menu
Configuration
Save and Activate
Clicking Save and Activate will save and activate
all changes made to the configuration and reboot
the system.
Clicking Discard Changes will discard all changes
made to the configuration.
19216811.live