Page 16 / 64
Scroll up to view Page 11 - 15
Home > WAN
Dynamic
Choose Dynamic IP Address to obtain IP Address information
automatically from your ISP. This option should be selected if
your ISP has not supplied you with an IP address. This option is
commonly used for Cable modem services.
Host Name
The Host Name is optional but may be required by some ISPs.
The default host name is the device name of the Router and
may be changed.
MAC Address
The default MAC Address is set to the WAN’s physical interface
MAC address on the Broadband Router. It is not recommended
that you change the default MAC address unless required by
your ISP.
Clone MAC Address
The default MAC address is set to the WAN’s physical interface
MAC address on the Broadband Router. You can use the “Clone
15
Page 17 / 64
MAC Address” button to copy the MAC address of the Ethernet
Card installed by your ISP and replace the WAN MAC address
with the MAC address of the router. It is not recommended that
you change the default MAC address unless required by your
ISP.
Enter a DNS Address if you wish not to use the address
provided by your ISP.
The upstream bandwidth can be set for the data traffic. The
bandwidth can be maximized for voice packets and limited for
data that requires less throughput.
Upstream Bandwidth
16
Page 18 / 64
Home > WAN > Static IP Address
Static IP Address
Choose Static IP Address if all WAN IP information is provided
to you by your ISP. You will need to enter in the IP address,
subnet mask, gateway address, and DNS address(es) provided
to you by your ISP. Each IP address entered in the fields must
be in the appropriate IP form, which are four octets separated
by a dot (x.x.x.x). The Router will not accept the IP address if it
is not in this format.
IP Address
Input the public IP Address provided by your ISP.
Subnet Mask
Input your Subnet mask. (All devices in the network must have
the same subnet mask.)
Input the public IP address of the ISP to which you are
connecting.
IP Gateway
Address
Input the primary DNS (Domain Name Server) IP address
provided by your ISP
This is an optional DNS Address entry to be used if the primary
17
Primary DNS
Address
Secondary DNS
Address
Page 19 / 64
18
DNS Fails.
Upstream Bandwidth
The upstream bandwidth can be set for the type of packets that
the will be sent. The bandwidth can be maximized for voice
packets and limited for data that requires less throughput.
Page 20 / 64
Home > WAN > PPPoE
Choose PPPoE (Point to
Point Protocol over Ethernet)
if your ISP uses a PPPoE
connection. Your ISP will
provide you with a username
and password. This option is
typically used for DSL
services.
PPPoE
Choose this option if your ISP uses PPPoE. (Most DSL users
will select this option.)
Password
Enter The PPPoE user name provided to you by your ISP.
Retype Password
Retype the password entered in the previous field.
Service Name
Enter the Service Name provided by your ISP (optional).
IP Address
This option is only available for Static PPPoE. Enter the static
IP Address for the PPPoE connection.
MAC Address
The default MAC Address is set to the WAN’s physical interface
MAC address on the Broadband Router. It is not recommended
that you change the default MAC address unless required by
your ISP.
19
19216811.live