D-Link DVG-G1402S Router Manual PDF (Setup & Configuration Guide)

Page 6 / 64 Scroll up to view Page 1 - 5

Rear Panel Connections

5

Phone

Connections

Connect to

your phones

using

standard

phone

cabling.

All Ethernet Ports (WAN

and LAN) are auto

MDI/MDIX, meaning you

can use either a

straight-through or a

crossover Ethernet

cable.

Auto MDI/MDIX

LAN Ports

Connect the

Ethernet cable

from computers

on your LAN to

these ports.

Factory Reset

Button

Pressing this

button will

restore the router

to its factory

default settings.

Power

Adapter

Connect

your 12V

1.25A

power

adapter

here.

WAN Port

Connect

the

Ethernet

cable from

your

ADSL

modem to

this port.

Page 7 / 64

Front Panel LEDs

Power LED

A solid light

indicates a

valid

connection

to the power

supply.

Status LED

A blinking LED

indicates the

DVG-G1402S

is functioning

properly.

WAN LED

An active LED

indicates a link

has been

established. A

blinking LED

indicates

activity on the

WAN port.

Phone LEDs

The Hook LED will

light when a

telephone is off the

hook. A blinking LED

indicates an

incoming call is

detected.

LAN LEDs

An active LED indicates a

link has been established.

A blinking LED indicates

activity on the LAN port.

6

Page 8 / 64

7

Features

•

1 NWay 10/100BASE-TX Fast Ethernet port for

WAN-connection

•

4 NWay 10/100BASE-TX Fast Ethernet port for

LAN-connection

•

2 Foreign Exchange Subscriber (FXS) POTS ports (RJ-11

Jacks)

•

Voice Activity Detection (VAD) /Comfort Noise Generation

(CNG)

•

Silence suppression to reduce bandwidth consumption.

•

Adaptive jitter buffer for a smooth voice reception

•

Lost packet recovery ability for improved voice quality

•

Support QoS (Quality of Service) for voice quality guarantee.

•

Build-in PPPoE function to support dial-up connection for

broadband technology.

•

IP address assignment using DHCP or static configuration

•

RIP1/RIP2 and static routing support

•

Support IP sharing to allow multiple users to access the

Internet via a single IP address

•

Support Caller ID function

•

Configuration download using HTTPS and SSL/TLS client

certificate encryption and authentication

•

Support VPN Pass-Through

•

MAC and Packet filter support

•

Remote configuration and management over the Internet

using web browsers

•

Firmware backup support

•

Support configuration backup and restore

Page 9 / 64

8

Installation

For a typical setup at home, please do the following:

1.

You will need broadband Internet access (a Cable or DSL-subscriber line

into your home or office)

2.

Consult with your Cable or DSL provider for proper installation of the

modem

3.

Connect the Cable or DSL modem to the DVG-G1402S VoIP Router (see

the printed Quick Installation Guide included with your router.)

4.

Install the D-Link DFE-530TX+ adapter into a desktop computer. The four

Ethernet LAN ports of the DVG-G1402S are Auto MDI/MDIX and will work

with both Straight-Through and Cross-over cables.

(See the printed Quick Installation Guide included with the DFE-530TX+.)

Page 10 / 64

Using the Configuration Wizard

9

192.168.15.1

Whenever you want to configure

your network or the DVG-G1402S,

you can access the Configuration

Menu by opening the web-browser

and typing in the IP Address of the

DVG-G1402S.

The

DVG-G1402S

default IP Address is shown to the

right:

•

Open the web browser

•

Type in the IP Address of the

Router (http://192.168.15.1)

•

Type admin in the User Name

field

•

Type admin in the Password

field

•

Click OK

The

Home > Wizard

screen will appear.

Please refer to the Quick Installation

Guide for more information regarding the

Setup Wizard.

These buttons appear on most of the

configuration screens in this section.

Please click on the appropriate button at

the bottom of each screen after you have

made a configuration change.

Note: if you have changed the default IP

Address assigned to the DVG-G1402S,

make sure to enter the correct IP

Address.

Clicking this button will save configured

settings to the router.

Clicking Cancel will clear changes made to

the current page.

Clicking Help will provide the user with

helpful

information

about

the

current

window.

Click refresh will refresh the statistics of the

current window.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share