19216811.liveUnified Services Router
User Manual
124
signature and Certificate authority. An Open VPN can be established through this
router. Check/Uncheck this and click save settings to start/stop openvpn server.
Mode: OpenVPN daemon mode. It can run in server mode, client mode or
access server client mode. In access server client mode, the user has to
download the auto login profile from the Openvpn Access Server and upload
the same to connect.
Server
IP:
OpenVPN
server
IP
address
to
which
the
client
connects(Applicable in client mode).
Vpn Network: Address of t he Virtual Network.
Vpn Netmask: Netmask of the Virtual Network.
Port: The port number on which openvpn server(or Access Server) runs.
Tunnel Protocol: The protocol used to communicate with the remote host.
Ex: Tcp, Udp. Udp is the default.
Encryption Algorithm: The cipher with which the packets are encrypted. Ex:
BF-CBC, AES-128,AES-192 and AES-256. BF-CBC is the default
Hash algorithm: Message digest algorithm used to authenticate packets. Ex:
SHA1, SHA256 and SHA512. SHA1 is the default.
Tunnel Type: Select Full Tunnel to redirect all the traffic through the
tunnel. Select Split Tunnel to redirect traffic to only specified resources
(added from openVpnClient Routes) through the tunnel. Full Tunnel is the
default.
Enable Client to Client communication: Ena ble this to allow openvpn clients
to communicate with each other in split tunnel case. Disabled by default.
Upload Access Server Client Configuration: The user has to download the
auto login profile and upload here to connect this router to the OpenVPN
Access Server.
Certificates: Select the set of certificates openvpn server uses. First Row:
Set of certificates and keys the server uses. Second Row: Set of certificates
and keys newly uploaded.
Enable Tls Authentication Key: Enabling this adds Tls authentication which
adds an additional layer of authentication. Can be checked only when the tls
key is uploaded. Disabled by default.
Click Save Settings to save the settings.