Page 11 / 20
Scroll up to view Page 6 - 10
D-Link Systems, Inc.
11
DSM-G600 Install Guide
Configuration
Select the type of network:
LAN
(Wired) or
Wireless.
Select either Static or Dynamic IP address. When Static is selected, you will
fill in these fields:
Static IP Address
Subnet Mask
Gateway Address
- Usually the LAN
address of your router.
DNS Address
- A Domain Name
Server translates Domain names into
IP addresses.
Configuration (continued)
Click
Next
.
Enter the Server Name.
This is the
name of the DSM-G600 device.
Enter and confirm a new password.
Click
Next
.
The Wizard will guide you through four
steps:
System
LAN or Wireless
Time
Additional settings
Click
Next
.
Page 12 / 20
12
D-Link Systems, Inc.
DSM-G600 Install Guide
Configuration
Select
Dynamic IP Address
when you
have a DHCP server in your network.
No other confi guration is required on
this screen when Dynamic IP address
is selected.
Select
Client
if you will be connecting
to an existing wireless router or access
point. Select
Access Point
if wireless
clients will be connecting directly to the
DSM-G600.
In
Wireless Mode
, select
Client
or
Access Point
mode.
Configuration (continued)
Click
Next
.
Click
Next
.
If you selected
LAN
, please skip to page 13 to continue your setup.
Page 13 / 20
D-Link Systems, Inc.
13
DSM-G600 Install Guide
Configuration
If your wireless network is using WEP
security, click
WEP
and enter the
encryption settings.
Click
Next
.
For more information on WEP and WPA security, please refer to section on
Wireless Security
in your manual located on the D-Link CD-ROM.
Configuration (continued)
Click
Next
.
If your wireless network is using
WPA-PSK security, click
WPA-PSK
and enter the encryption settings.
All devices on your network must share the same SSID and Channel in order
to communicate.
When
Client
is selected, you can click
Site Survey
to select a network from
a list of available wireless networks
or you may enter the wireless settings
manually. The SSID must be the same
for all devices in the network.
Click
Next
.
Page 14 / 20
14
D-Link Systems, Inc.
DSM-G600 Install Guide
Configuration
Select the appropriate
Time
Zone
in the pulldown menu.
Set device date and time
You have completed the basic configuration using the setup wizard!
Enter the
Workgroup
name.
Configuration (continued)
Click
Restart
.
Click
Next
.
Page 15 / 20
D-Link Systems, Inc.
15
DSM-G600 Install Guide
Accessing the DSM-G600
Accessing the DSM-G600
in Windows
®
XP using UPnP™
Double-click
My Network
Places
on the Windows
Desktop.
For Windows
®
XP users, it is recommended to activate UPnP for ease of use.
To learn how to activate UPnP, please refer to page 15 of the manual.
Once connected, the device
will appear in
My Network
Places
as a shared folder.
19216811.live