D-Link DSM-G600v2 Router Manual PDF (Setup & Configuration Guide)
Given below is full router user manual of D-Link DSM-G600v2 router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 1 / 20
Version 1.0
DSM-G600
Wireless Network Storage Enclosure
Page 2 / 20
2
D-Link Systems, Inc.
DSM-G600 Install Guide
System Requirements
System Requirements
Computer with Windows
®
XP or 2000
Internet Explorer 6.0 or Netscape
®
Navigator 7.0 and above
An 802.11g/b wireless network
USB Hard Drive and/or Internal 3.5” ATA/IDE Hard Drive
An available Ethernet port on the network*
Manual and Software
on CD
Package Contents
D-Link DSM-G600
Wireless Storage Enclosure
Ethernet Cable
12V 3A Power Supply
*
It is required that an Ethernet cable is used during initial setup. Once
your wireless configuration is set, you may disconnect the Ethernet cable
and begin communicating wirelessly with your DSM-G600.
Page 3 / 20
D-Link Systems, Inc.
3
DSM-G600 Install Guide
Hardware Overview
Front Panel
LAN LED
Solid indicates an Ethernet connection.
Blinking indicates traffic at the Ethernet
port.
HDD LED
Indicates activity on the
internal hard drive.
Power LED
Solid indicates a connection to
a good power source. Blinking
indicates startup or a reboot.
WLAN LED
A solid light indicates that wireless
is ready. This LED blinks during
wireless data transmission.
USB LED
A solid light indicates that a USB
drive is connected.
HDD-Full LED
Indicates that the internal hard
drive is out of space.
Power Button
Press to turn the device on.
To turn off, hold button in for 5
seconds and then release.
Page 4 / 20
4
D-Link Systems, Inc.
DSM-G600 Install Guide
Hardware Overview
Rear Panel
Reset Button
Pressing the reset button for 10 seconds with
a paper clip will restore the unit to the original
factory default settings. The button is inside the
hole to prevent an accidental reset.
USB 2.0 Ports
Use these ports to connect USB 2.0 drives.
USB 1.1 drives may also be connected but
will be limited to USB 1.1 speed.
Power Receptor
Receptor for the supplied
power adapter.
LAN Port
Connects to your Ethernet network. The LAN port
supports
Auto MDI/MDI-X, allowing you to connect a
straight-through or crossover cable.
Dismount Button
Press to safely remove USB
drives from the DSM-G600.
Fan/Vent
Fan to cool the internal
hard drive.
Antenna
Connects to a
wireless network.
Page 5 / 20
D-Link Systems, Inc.
5
DSM-G600 Install Guide
Installation Overview
Installation Overview
Once you’ve completed your DSM-G600 installation, your network may appear
19216811.live