D-Link DSL-6740U Router Manual PDF (Setup & Configuration Guide)

Page 141 / 158 Scroll up to view Page 136 - 140

DSL-6740U

VDSL/Ethernet Router with Wi-Fi

and Built-in Switch

User Manual

Configuring via Web-based Interface

Figure 103. The

Control / URL filter

page. The

URL addresses

tab.

Click the

Add

button and enter a URL address in the

URL address

field, specify a port (as usual,

you need to specify port 80 for HTTP), then click the

Save

button.

To remove an address from the list of URL addresses, select the checkbox located to the left of the

relevant line in the table and click the

Save

button.

To disable the URL filter, deselect the

Enable/Disable URL filter

checkbox on the

Configuration

tab, then click the

Change

button.

Page

141

of 158

Page 142 / 158

DSL-6740U

VDSL/Ethernet Router with Wi-Fi

and Built-in Switch

User Manual

Configuring via Web-based Interface

System

In this menu you can do the following:

•

change the password used to access the router's settings

•

save the current settings to the non-volatile memory

•

create a backup of the router's configuration

•

restore the router's configuration from a previously saved file

•

restore the factory default settings

•

view the system log

•

update the firmware of the router

•

configure automatic synchronization of the system time or manually configure the date and

time for the router

•

allow or forbid access to the router via TELNET.

Page

142

of 158

Page 143 / 158

DSL-6740U

VDSL/Ethernet Router with Wi-Fi

and Built-in Switch

User Manual

Configuring via Web-based Interface

Administrator Password

On the

System / Administrator password

page, you can change the password for the

administrator account used to access the web-based interface of the router and to access the device

settings via TELNET.

!

For security reasons, it is strongly recommended to change the administrator password

upon initial configuration of the router.

Figure 104. The page for modifying the administrator password.

Enter the new password in the

Password

and

Confirmation

fields and click the

Save

button.

Page

143

of 158

Page 144 / 158

DSL-6740U

VDSL/Ethernet Router with Wi-Fi

and Built-in Switch

User Manual

Configuring via Web-based Interface

Configuration

On the

System / Configuration

page, you can save the changed settings to the non-volatile

memory, restore the factory defaults, backup the current configuration, or restore the router's

configuration from a previously created file.

Figure 105. The

System / Configuration

page.

The following buttons are available on the page:

Control

Description

Save

Click the button to save settings to the non-volatile memory. Please,

save settings every time you change the router's parameters.

Otherwise the changes will be lost upon reboot of the router.

Factory

Click the button to restore the factory default settings. Also you can

restore the factory defaults via the hardware

RESET

button (see the

Saving and Restoring Settings

section, page 33).

Backup

Click the button and follow the dialog box appeared to save the

configuration (all settings of the router) to your PC.

Browse

Click the button and follow the dialog box appeared to select a

previously saved configuration file (all settings of the router) located

on your PC and upload it.

Actions of the

Save

,

Factory

, and

Backup

buttons also can be performed via the top-page menu

displayed when the mouse pointer is over the

System

caption.

Page

144

of 158

Page 145 / 158

DSL-6740U

VDSL/Ethernet Router with Wi-Fi

and Built-in Switch

User Manual

Configuring via Web-based Interface

System Log

On the

System / System log

page, you can set the system log options and configure sending the

system log to a remote host.

Figure 106. The

System / System log

page. The

Configuration

tab.

To enable logging of the system events, select the

Logging

checkbox on the

Configuration

tab.

Then specify the needed parameters.

Control

Description

Logging type

Select a type of logging from the drop-down list.

•

Local

: the system log is stored in the router's memory (and

displayed on the

Log

tab). When this value is selected, the

Server

and

Port

fields are not displayed.

•

Remote

: the system log is sent to the remote host specified in

the

Server

field.

•

Local and remote

: the system log is stored in the router's

memory (and displayed on the

Log

tab) and sent to the

remote host specified in the

Server

field.

Page

145

of 158

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share