Page 121 / 158
Scroll up to view Page 116 - 120
DSL-6740U
VDSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Configuring via Web-based Interface
ADSL
The
Advanced / ADSL
page includes the set of ADSL standards that should be defined by an ISP.
Contact your ISP to set proper parameters. Select the relevant options and click the
Change
button.
Figure 90. The
Advanced / ADSL
page.
Page
121
of 158
Page 122 / 158
DSL-6740U
VDSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Configuring via Web-based Interface
Remote Access
On the
Advanced / Remote access
page, you can configure remote access to the web-based
interface of the router. By default, the access from external networks to the router is closed. If you
need to allow access to the router from the external network, create relevant rules.
Figure 91. The
Advanced / Remote access
page.
To create a new rule, click the
Add
button. In the line displayed, you can specify the following
parameters:
Parameter
Description
Name
A name for the rule for easier identification. You can specify any
name.
Interface
A connection through which the web-based interface of the router is
accessed.
IP address
A host or a subnet to which the rule is applied.
Mask
The mask of the subnet.
Public port
An external port of the router. You can specify only one port. The
field is available when the
HTTP
value is selected from the
Protocol
drop-down list.
Protocol
The protocol available for remote management of the router.
Page
122
of 158
Page 123 / 158
DSL-6740U
VDSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Configuring via Web-based Interface
After specifying the needed parameters, click the
Save
button.
To edit a rule for remote access, select a needed field in the relevant line of the table, change its
value, and click the
Save
button.
To remove a rule for remote access, select the checkbox located to the left of the relevant line in the
table and click the
Save
button.
Page
123
of 158
Page 124 / 158
DSL-6740U
VDSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Configuring via Web-based Interface
TR-069 Client
On the
Advanced / TR-069 Client
page, you can configure the router for communication with a
remote Auto Configuration Server (ACS).
The TR-069 client is used for remote monitoring and management of the device.
Figure 92. The page for configuring the TR-069 client.
You can specify the following parameters:
Parameter
Description
Interface
The interface which the router uses for communication with the
ACS. You can select the local interface (the
LAN
value), any
existing WAN connection (the
ANY WAN
value) or one WAN
connection.
Inform settings
Enable
Select the checkbox so the router may send reports (data on the
device and network statistics) to the ACS.
Interval
Specify the time period (in minutes) between sending reports.
Auto Configuration Server settings
URL address
The URL address of the ACS provided by the ISP.
Page
124
of 158
Page 125 / 158
DSL-6740U
VDSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Configuring via Web-based Interface
Parameter
Description
User name
The username to connect to the ACS. The username can contain
digits, Latin letters (uppercase and/or lowercase), and characters
available on the keyboard.
Password
The password to connect to the ACS. The password can contain
digits, Latin letters (uppercase and/or lowercase), and characters
available on the keyboard.
Connection settings
User name
The username which the ACS uses to connect to the router. The
username can contain digits, Latin letters (uppercase and/or
lowercase), and characters available on the keyboard.
Password
The password which the ACS uses to connect to the router. The
password can contain digits, Latin letters (uppercase and/or
lowercase), and characters available on the keyboard.
When you have configured the parameters, click the
Change
button.
Page
125
of 158
19216811.live