D-Link DSL-504T Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

D-Link

DSL-504T

Page 26 / 75 Scroll up to view Page 21 - 25

DSL-504T DSL Router User

’

s Guide

Set a password that is required to make changes to the configuration settings of the Router in the

Advanced Configurations menus. Type in a password and verify it by typing a second time. Click

to continue.

Set the system time of the Router. Choose the time zone you are in from the pull-down menu and

click

. If you wish to return to the previous menu during the setup process, click the

Back

button.

Note

Page 27 / 75

DSL-504T DSL Router User

’

s Guide

Now select the Connection Type for the Internet and enter your account User Name and Password.

Your ISP has given this information to you. The connection types available in the Setup Wizard

menu are PPPoE LLC, PPPoA LLC and PPPoA VC-MUX. For Bridge Mode and Static IP connections,

use the WAN menu in the Home directory to configure the connection (see below for instruction on

setting up Bridge and Static IP connections).

1. Select the

Connection Type

specific to your service. The choices available in the Setup

Wizard are

PPPoE LLC

PPPoA LLC

and

PPPoA VC-MUX

2. Type in the

Username

and

Password

used to identify and verify your account to the ISP.

3. Click

to go to the next menu and complete the setup wizard.

Note

Page 28 / 75

DSL-504T DSL Router User

’

s Guide

Finally you can confirm that the setup process is completed. If you are satisfied that you have

entered all the necessary information correctly, click the

Restart

button to save the new

configuration settings and restart the Router. If you need to change settings from a previous menu,

click the

Back

button.

Do not turn the Router off while it is restarting. When it is finished rebooting, click

to close

the box and continue to configure the Router as desired.

Page 29 / 75

DSL-504T DSL Router User

’

s Guide

Configure WAN Connection

To configure the Router

’

s basic configuration settings without running the Setup Wizard, you can

access the menus used to configure WAN, LAN, DHCP and DNS settings directly from the

Home

directory. To access the WAN Settings menu, click on the

WAN

link button on the left side of the

first window that appears when you successfully access the web manager.

The WAN Settings menu is also used to configure the Router for multiple virtual connections

(Multiple PVCs).

WAN Settings Menu

–

PPPoE / PPPoA

Select the connection type used for your account. The menu will display settings that are

appropriate for the connection type you select. Follow the instruction below according to the type

of connection you select in the WAN Settings menu.

Page 30 / 75

DSL-504T DSL Router User

’

s Guide

PPPoE and PPPoA Connection for WAN

Follow the instructions below to configure the Router to use a PPPoE or PPPoA for the Internet

connection. Make sure you have all the necessary information before you configure the WAN

connection.

1. Click to select the

PPPoE/PPPoA

radio button in the

WAN Settings

options list. This is

selected by default if you are configuring the Router for the first time. If it is not selected,

click the

PPPoE/PPPoA

radio button located under the

WAN Settings

heading.

2. The

ATM VC Settings

at the top of the menu should not be changed unless you have been

instructed to change them. However, if you are instructed to change the

VPI

VCI

values,

type in the values assigned for your account. Leave the

PVC

and

Virtual Circuit

settings

at their default (

Pcv0

and

Enabled

) values for now. These can be used later if you are

configuring multiple virtual circuits for your ADSL service.

3. Under the

PPPoE/PPPoA

heading, type the

User Name

and

Password

used for your

ADSL account. A typical User Name will be in the form [email protected]

, the Password may

be assigned to you by your ISP or you may have selected it when you set up the account

with your ISP.

4. Choose the

Connection Type

from the pull-down menu located under the User Name and

Password entry fields. This defines both the connection protocol and encapsulation method

used for your ADSL service. The available options are

PPPoA VC-MUX, PPPoA LLC

and

PPPoE LLC.

If have not been provided specific information for the Connection Type setting,

leave the default setting.

5. Leave the

MRU

value at the default setting (default = 1492) unless you have been

instructed to change this.

If you are instructed to use enable

Default Route

, this setting specifies that the Router be

used to define the default route to the Internet for your LAN. Whenever a computer on the

LAN attempts to access the Internet, the Router becomes the Internet gateway to the

computer.

7. If you have not been instructed to change the ATM (PVC) settings at the bottom of the

menu, leave these at the default settings. If you have been given new settings to configure,

type in the values for

VPI

and

VCI

. If you are setting up multiple connections, the

procedure for this is described in a separate section below.

8. When you are satisfied that all the WAN settings are configured correctly, click on the

Apply

button.

9. The new settings must be saved and the Router must be restarted for the settings to go

into effect. To

Save & Reboot

the Router, click on the

Tools

directory tab and then click

the

Save & Reboot

menu button. In the Save and Reboot menu, click the

Reboot

button

under

Force the DSL-504T to system restart

. The Router will save the new settings and

restart. Upon restarting the Router will automatically establish the WAN connection.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share