D-Link DSL-500B Router Manual PDF (Setup & Configuration Guide)

Page 76 / 84 Scroll up to view Page 71 - 75

76

D-Link DSL-500B User Manual

Web Conﬁguration

TR-069 Client

Select

Management > TR-069 Client

.

The

TR-069 client - Conﬁguration

page will appear.

Select the desired values and click

Save/Apply

to conﬁgure the

TR-069 Client

options.

Internet Time

Select

Management > Internet Time

and the

Time Settings

page

will appear.

Note:

When the PVC is PPPoE connection, the

Internet Time

option will appear in the

Management

directory.

This window allows you to set the Router’s time conﬁguration.

Click

Save/Apply

to save your changes.

Page 77 / 84

77

D-Link DSL-500B User Manual

Web Conﬁguration

Access Control

Access Control – Services

Select

Management >

Access Control

>

Services

. In this

interface, you can enable or disable HTTP, ICMP, SSH, TELNET

and TFTP services. And the LAN and WAN side can have different

conﬁguration.

Note:

If the connection is PPPoE PVC, you can view the infor-

mation on WAN side.

Access Control - IP Address

Select

Management > Access Control

>

IP Address

. The

Access Control - IP Address

page will appear.

If you enable

Access Control Mode

, the Router permits access

to local management services from IP addresses contained in the

Access Control List.

If you disable

Access Control Mode

, the system does not validate

IP addresses for incoming packets. The services are the system

applications listed in the

Service Control List

.

Click

Add

and the Access Control page will appear. Enter the IP

address of the management station permitted to access the local

management services, and click

Save/Apply

.

Page 78 / 84

78

D-Link DSL-500B User Manual

Web Conﬁguration

Access Control - Passwords

Select

Access Control

>

Passwords

to change the password of

the Router.

Update Software

Select

Management

> Update Firmware

. In this page, you can

update the Router's ﬁrmware.

Click

Browse

to ﬁnd the ﬁle and click

Update Firmware

to update.

Note:

Do not turn off your Router during ﬁrmware updates. When

the update is ﬁnished, the Router reboots automatically. Do not

turn off your modem either before the reboot is over. It is strictly

forbidden to use other software for updates.

After updating the software, it is suggested to restore the Router to

factory defaults and conﬁgure it again.

Save/Reboot

Select

Management

>

Save/Reboot.

Click

Save/Reboot

to save your settings and reboot the router.

Page 79 / 84

79

D-Link DSL-500B User Manual

Appendix A - Troubleshooting

This chapter provides solutions to problems that might occur during the installation and operation of the DSL-500B.

(The examples below are illustrated in Windows

®

XP. If you have a different operating system, the screenshots on

your computer will look similar to the following examples.)

1. How do I conﬁgure my DSL-500B Router without the CD-ROM?

Connect your PC to the Router using an Ethernet cable.

±

Open a web browser and type

±

http://192.168.254.254

.

The default username is

±

admin

and the default password is

admin

.

If you have changed the password and cannot remember it, you will need to reset the Router to the factory

±

default setting (see question 2). This default password is

admin

.

Note:

If you cannot see the login window, please refer to the next section -

Network Basics

to check your PC’s IP

conﬁguration.

2. How do I reset my Router to the factory default settings?

Ensure that the Router is powered on.

±

Press and hold the reset button on the back of the device for few seconds.

±

This process would take about 1~2 minutes to complete.

±

Note:

Resetting the Router to the factory default settings will erase the current conﬁguration settings. To reconﬁgure

your settings, log in to the Router as outlined in question 1.

Troubleshooting

Appendix A - Troubleshooting

Page 80 / 84

80

D-Link DSL-500B User Manual

Appendix A - Troubleshooting

3. What can I do if my Router is not working correctly?

Here are a few steps that you can follow to resolve the issue:

Follow the directions highlighted in question 2 to reset the Router.

±

Check if all the cables are ﬁrmly connected at both ends.

±

Check the LEDs on the front of the Router. The Power indicator, DSL and LAN indicators should be illuminated.

±

Please ensure that the settings in the Web-based conﬁguration manager, e.g. ISP username and password, are

±

the same as the settings provided by your ISP.

4. Why can’t I connect to the Internet?

For ADSL subscribers, please contact your ISP to make sure the ADSL service has been enabled, and your ISP

username and password are correct.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share