Page 71 / 84
Scroll up to view Page 66 - 70
71
D-Link DSL-500B User Manual
Web Configuration
DNS Server
Select
Advanced Setup
>
DNS.
The
DNS Server Configuration
page will appear.
If you select
Enable Automatic Assigned DNS
, this router will
accept the first received DNS assignment from one of the PPPoA,
PPPoE or MER/DHCP enabled PVC(s) during the connection.
If the checkbox is not selected, enter the primary and secondary
DNS server IP addresses.
Click
Save
to save the new configuration.
Note:
You must reboot the router to make the new configuration
effective.
DNS
In this interface, you can modify the Dynamic DNS settings. The Dynamic DNS service allows you to alias a
dynamic IP address to a static hostname in any of the many domains, allowing your DSL router to be more easily
accessed from various locations on the Internet.
Page 72 / 84
72
D-Link DSL-500B User Manual
Web Configuration
DSL
Select
Advanced Setup
>
DSL.
The
DSL Settings
page
will
appear.
The available settings include G.Dmt/ G.lite/ T1.413/ ADSL2/
AnnexL/ ADSL2+/ AnnexM / Inner pair / Outer pair / Bitswap / SRA.
The Router can negotiate the modulation mode with the DSLAM.
Click
Advanced Settings
to select the DSL test mode.
In the
DSL Advanced Settings
page select the desired DSL test
mode and then click
Apply
.
Click
Tone Selection
to modify the upstream and downstream
tones.
Select the appropriate upstream and downstream tones for your
ADSL connection and then click
Apply
.
Page 73 / 84
73
D-Link DSL-500B User Manual
Web Configuration
Management
The Management features an array of options designed to help you get the most out of your Router.
Settings
Settings Backup
Select
Management
> Settings
>
Backup.
This page allows you
to
back up your DSL Router configuration.
Click
Backup Settings
to save your Router configuration to a file on
your computer.
Click
Diagnostics
to show the interface.
Your modem is capable of testing your DSL connection. The
individual tests are listed below. If a test displays a fail status, click
Rerun Diagnostic Tests
at the bottom of this page to make sure
the fail status is consistent. If the test continues to fail, click
Help
and follow the troubleshooting procedures.
Diagnostics
Page 74 / 84
74
D-Link DSL-500B User Manual
Web Configuration
Select
Management
>
System Log.
The
System Log page
will
appear
.
The system log interface allows you to view the system log
and configure the system log options.
Click
Configure System Log
and the
System Log - Configu
-
ration
page will appear
.
System Log
Here, you can enable or disable the system log and select the
Log
Level
,
Display Level
and
Mode
. Click
Save/Apply
to save your
changes.
Both the log level and display level have eight choices. The default
log level is
Debugging
and the default display level is
Error
.
The mode options are
Local
,
Remote
, and
Both
. The default
option is
Local
.
If you select
Remote
or
Both
, all events are transmitted to the
specified UDP port of the specified log server.
Page 75 / 84
75
D-Link DSL-500B User Manual
Web Configuration
After configuring the System Log options, click
View System Log
to query the system logs. In this example, the
View System Log
displays the default values.
Note:
The log and display of the system events are above the set
level. If you intend to record all information, you must set the levels
as
Debugging
.
Click
Refresh
to refresh the system event logs or click
Close
to
exit from this interface.
System Agent
Select
Management > SNMP Agent
. The
SNMP - Configuration
page will appear.
Simple Network Management Protocol (SNMP) allows a
management application to retrieve statistics and status from the
SNMP agent in the Router.
Click
Save/Apply
to save your changes.
19216811.live