1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DSL-4320L
    5. /
  5. 23
Page 111 / 154 Scroll up to view Page 106 - 110
107
D-Link DSL-4320L User Manual
Section 4 - Configuration
Port Forwarding
Enter a name for the rule.
Enter the IP address of the computer on your local network that you
want to allow the incoming service to. Alternatively, select the device
from the drop-down menu.
Enter the TCP ports that you want to open. You can enter a single
port or a range of ports. Separate ports with a comma (for example:
24,1009,3000-4000).
Enter the UDP ports that you want to open. You can enter a single
port or a range of ports. Separate ports with a comma (for example:
24,1009,3000-4000).
Use the drop-down menu to select the time schedule that the rule
will be enabled on. The schedule may be set to
Always Enable
, or
you can create your own schedules in the
Schedules
section. Refer
to 115 for more information.
Click
Apply
when you are done.
Name:
Local IP:
TCP Port:
UDP Port:
Schedule:
Port forwarding allows you to specify a port or range of ports to open for specific
devices on the network. This might be necessary for certain applications to connect
through the router. In the Features menu on the bar on the top of the page, click
Port Forwarding
.
If you wish to remove a rule, click on its trash can icon in the Delete column. If you
wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a
new rule, click the
Add Rules
button
.
Click
Save
when you are done. If you edit or
create a rule, the following options will appear:
Page 112 / 154
108
D-Link DSL-4320L User Manual
Section 4 - Configuration
Virtual Server
Enter a name for the rule.
Enter the IP address of the computer on your local network that you
want to allow the incoming service to. Alternatively, select the device
from the drop-down menu.
Select the protocol of the traffic to allow or deny (
TCP
,
UDP
,
Both
,
or
Other
).
If you entered
Other
above, enter the protocol number.
Enter the public port you want to open.
Enter the private port you want to open.
Use the drop-down menu to select the time schedule that the rule
will be enabled on. The schedule may be set to
Always Enable
, or
you can create your own schedules in the
Schedules
section. Refer
to page 115 for more information.
Click
Apply
when you are done.
The virtual server allows you to specify a single public port on your router for
redirection to an internal LAN IP Address and Private LAN port. To configure the
virtual server, from the Port Forwarding page click
Virtual Server
. To return to the
main Port Forwarding page, click
Port Forwarding
.
If you wish to remove a rule, click on its trash can icon in the Delete column. If you
wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a
new rule, click the
Add Rules
button
.
Click
Save
when you are done. If you edit or
create a rule, the following options will appear:
Name:
Local IP:
Protocol:
Protocol
Number:
External Port:
Internal Port:
Schedule:
Page 113 / 154
109
D-Link DSL-4320L User Manual
Section 4 - Configuration
Website Filter
The website filter settings allow you to block access to certain web sites. You can
either create a list of sites to block, or create a list of sites to allow (with all other sites
being blocked).
In the Features menu on the bar on the top of the page, click
Website Filter
.
If you want to create a list of sites to block, select
DENY computers access to ONLY
these sites
from the drop-down menu. All other sites will be accessible. If you want
to specify a list of sites to allow, select
ALLOW computers access to ONLY these
sites
from the drop-down menu. All other sites will be blocked.
You may specify a maximum of fifteen web sites. To add a new site to the list, click
Create New Rule
. Next, under Website URL/Domain enter the URL or domain. If you
wish to remove a rule, click on its trash can icon in the Delete column. If you wish to
edit a rule, simply replace the URL or domain.
Click
Save
when you are done.
Page 114 / 154
110
D-Link DSL-4320L User Manual
Section 4 - Configuration
Static Routes
Enter a name for the rule.
Enter the IP address of packets that will take this route.
Enter the netmask of the route.
Enter your next hop gateway to be taken if this route is used.
The route metric is a value from 1 to 16 that indicates the cost of
using this route. A value 1 is the lowest cost and 15 is the highest cost.
Select the interface that the IP packet must use to transit out of the
router when this route is used.
Click
Apply
when you are done.
The Static Routes section allows you to define custom routes to control how data
traffic is moved around your network.
In the Features menu on the bar on the top of the page, click
Static Routes
.
To configure IPv6 rules, click
IPv6
and refer to page 111 for more information. To
return to the main IPv4 static routes page, click
IPv4
.
If you wish to remove a rule, click on its trash can icon in the Delete column. If you
wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a
new rule, click the
Add Rules
button
.
Click
Save
when you are done. If you edit or
create a rule, the following options will appear:
Name:
Destination IP:
Netmask:
Gateway:
Metric:
Interface:
Page 115 / 154
111
D-Link DSL-4320L User Manual
Section 4 - Configuration
Enter a name for the rule.
This is the IP address of the router used to reach the specified
destination.
Enter the IPv6 address prefix length of the packets that will take this
route.
Enter the metric value for this rule here.
Select the interface that the IP packet must use to transit out of the
router when this route is used.
Click
Apply
when you are done.
Name:
DestNetwork:
PrefixLen:
Metric:
Interface:
IPv6
To configure IPv6 rules, on the Static Routes page click
IPv6
. To return to the main
IPv4 static routes page, click
IPv4
.
If you wish to remove a rule, click on its trash can icon in the Delete column. If you
wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a
new rule, click the
Add Rules
button
.
Click
Save
when you are done. If you edit or
create a rule, the following options will appear:

Rate

4 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top