1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DSL-2890AL
    5. /
  5. 25
Page 121 / 186 Scroll up to view Page 116 - 120
Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration
Page 121
In this section, the following parameters can be configured:
PPTP:
Tick this option to allow PPTP traffic. This feature allows multiple machines
on the LAN to connect to their corporate network using the PPTP protocol.
IPSec (VPN):
Tick this option to allow IPSec (VPN) traffic. This feature allows
multiple VPN clients to connect to their corporate network using IPSec. Some
VPN clients support traversal of IPSec through NAT. This ALG may interfere
with the operation of such VPN clients. If you are having trouble connecting
with your corporate network, try turning this ALG off. Please check with the
system administrator of your corporate network whether your VPN client
supports NAT traversal.
RSTP:
Tick this option to allow RSTP traffic. This feature allows an application that uses Real Time Streaming Protocol to receive streaming media from the Internet.
QuickTime and Real Player are some of the common applications using this protocol.
SIP:
Tick this option to allow SIP traffic. This feature allows devices and applications using VoIP (Voice over IP) to communicate across NAT. Some VoIP applications and
devices have the ability to discover NAT devices and work around them. This ALG may interfere with the operation of such devices. If you are having trouble making
VoIP calls, try turning this ALG off.
Click the
Save Settings
button to accept the changes made.
Click the
Don’t Save Settings
button to discard the changes made.
Page 122 / 186
Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration
Page 122
Routing
To access the
Routing
page, click on the
Advanced
menu link, at the top, and then click on the
Routing
menu link, on the left.
On this page we can configure IPv4 routing rules used by this router.
Click the
Save Settings
button to accept the changes made.
Click the
Don’t Save Settings
button to discard the changes made.
In this section, the following parameters can be configured:
Checkbox:
Tick this option to enable the selected route.
Name:
Enter the name of the route here.
Netmask:
Enter the Netmask address of the route here.
Destination IP:
Enter the destination IP address of the route here.
Gateway:
Enter the gateway IP address of the route here.
Metric:
Enter the metric value for the route here.
Interface:
Select the Interface that will use this route here.
Page 123 / 186
Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration
Page 123
Advanced Wireless
To access the
Advanced Wireless
page, click on the
Advanced
menu link, at the top, and then click on the
Advanced Wireless
menu link, on the left.
On this page we can configure more advanced wireless settings on this router.
Click the
Save Settings
button to accept the changes made.
Click the
Don’t Save Settings
button to discard the changes made.
Page 124 / 186
Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration
Page 124
In this section, the following parameters can be configured:
Wireless Band:
Displays the wireless band that can be configured.
Transmit Power:
Select the wireless transmit power for the 2.4GHz band. Options
to choose from are
High
,
Medium
, and
Low
.
WLAN Partition:
Tick this option to enable the WLAN partition feature. This
enables 802.11d operation. 802.11d is a wireless specification developed to
allow the implementation of wireless networks in countries that cannot use the
802.11 standard. This feature should only be enabled if you are in a country
that requires it.
WMM Enable:
Display that the Wi-Fi Multimedia (WMM) feature is enabled. WMM is QoS for your wireless network. This will improve the quality of video and voice
applications for your wireless clients.
HT 20/40 Coexistence:
Select to enable or disable the HT 20/40 coexistence feature. Enable this option to reduce interference from other wireless networks in your area. If
the channel width is operating at 40MHz and there is another wireless network’s channel over-lapping and causing interference, the router will automatically change to
20MHz.
In this section, the following parameters can be configured:
Wireless Band:
Displays the wireless band that can be configured.
Transmit Power:
Select the wireless transmit power for the 5GHz band. Options to
choose from are
High
,
Medium
, and
Low
.
WLAN Partition:
Tick this option to enable the WLAN partition feature. This
enables 802.11d operation. 802.11d is a wireless specification developed to
allow the implementation of wireless networks in countries that cannot use the
802.11 standard. This feature should only be enabled if you are in a country
that requires it.
WMM Enable:
Display that the Wi-Fi Multimedia (WMM) feature is enabled. WMM is QoS for your wireless network. This will improve the quality of video and voice
applications for your wireless clients.
Click the
Save Settings
button to accept the changes made.
Click the
Don’t Save Settings
button to discard the changes made.
Page 125 / 186
Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration
Page 125
Wi-Fi Protected Setup
To access the
Wi-Fi Protected Setup
page, click on the
Advanced
menu link, at the top, and then click on the
Wi-Fi Protected Setup
menu link, on the left.
On this page we can configure the Wi-Fi Protected Setup (WPS) settings on this
router.
Click the
Save Settings
button to accept the changes made.
Click the
Don’t Save Settings
button to discard the changes made.
In this section, the following parameters can be configured:
Enable:
Tick this option to enable the Wi-Fi Protected Setup (WPS) feature.
WiFi Protected Setup:
Displays the status of the WPS feature.
Lock WPS-PIN Setup:
Tick this option to lock the WPS-PIN setup.

Rate

4 / 5 based on 1 vote.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top