Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration
Page 113
Step 3: Select Machine
In this step, we can configure which computers will be involved in this access control
rule. The following parameters can be configured:
Address Type:
Select the address type option here. Options to choose from are
IP
,
MAC
, and
Other Machines
.
IP Address:
After selecting
IP
as the address type, enter the IP address of the local
node here.
Machine Address:
After selecting
MAC
as the address type, enter the MAC
address of the local node here. Alternatively, click the
Clone Your PC’s MAC
Address
button of insert the MAC address of the computers currently used to
access the Web UI.
Click the
icon to modify the specific entry.
Click the
icon to delete the specific entry.
Click the
Prev
button to return to the previous page.
Click the
Next
button to accept the changes made and continue to the next step.
Click the
Cancel
button to discard the changes made and return to the main page.
Step 4: Select Filtering Method
In this step, we can select the filtering method that will be applied to this access rule.
The following parameters can be configured:
Method:
Select the filtering method used here. Select
Log Web Access Only
, to
only allow web access to the nodes specified in the previous step. Select
Block All Access
, to block all access to the network. Select
Block Some
Access
, to block access only to the conditions specified in the next step.
Apply Web Filter:
Tick this option to enable web filtering.
Apply Advanced Port Filter:
Tick this option to apply advanced port filters.
Click the
Prev
button to return to the previous page.
Click the
Next
button to accept the changes made and continue to the next step.
Click the
Cancel
button to discard the changes made and return to the main page.
19216811.live