D-Link DSL-2890AL Router Manual PDF (Setup & Configuration Guide)

Page 81 / 186 Scroll up to view Page 76 - 80

Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual

Web User Interface Configuration

Page 81

In this section, the following parameters can be configured:

Enable Automatic IPv6 address assignment:

Tick this option to enable automatic

IPv6 address assignment.

Enable Automatic DHCP-PD in LAN:

Tick this option to enable automatic DHCP-

PD in LAN.

Autoconfiguration Type:

Select the IPv6 auto-configuration type here. Options to

choose from are

SLAAC+RDNSS

,

SLAAC+Stateless DHCP

, and

Stateful

DHCPv6

.

Router Advertisement Lifetime:

After selecting

SLAAC+Stateless DHCP

as the

auto-configuration type, enter the router advertisement lifetime value here.

Click the

Save Settings

button to accept the changes made.

Click the

Don’t Save Settings

button to discard the changes made.

In this section, the following parameters can be configured:

Enable Automatic IPv6 address assignment:

Tick this option to enable automatic

IPv6 address assignment.

Enable Automatic DHCP-PD in LAN:

Tick this option to enable automatic DHCP-

PD in LAN.

Autoconfiguration Type:

Select the IPv6 auto-configuration type here. Options to

choose from are

SLAAC+RDNSS

,

SLAAC+Stateless DHCP

, and

Stateful

DHCPv6

.

IPv6 Address Range (Start):

After selecting

Stateful DHCPv6

as the auto-

configuration type, enter the starting IPv6 address and prefix for the range

here.

IPv6 Address Range (End):

After selecting

Stateful DHCPv6

as the auto-

configuration type, enter the ending IPv6 address and prefix for the range here.

IPv6 Address Lifetime:

After selecting

Stateful DHCPv6

as the auto-configuration

type, enter the IPv6 address lifetime value here.

Click the

Save Settings

button to accept the changes made.

Click the

Don’t Save Settings

button to discard the changes made.

Page 82 / 186

Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual

Web User Interface Configuration

Page 82

IPv6 Connection Type – PPPoE

In this section, the following parameters can be configured:

My IPv6 Connection is:

Select the IPv6 Internet connection type that will be used

by this router. Options to choose from are

Auto Detection

,

Static IPv6

,

Auto-

configuration (SLAAC/DHCPv6)

,

PPPoE

,

IPv6 in IP4 Tunnel

,

6to4

,

6rd

, and

Local Connectivity Only

. In this section we’ll discuss the

PPPoE

option.

In this section, the following parameters can be configured:

PPPoE Session:

Select the PPPoE session used here. To share this connection

with IPv4, select the

Share with IPv4

option. To create a new connection,

select the

Create a new session

option.

Address Mode:

Select the PPPoE address mode here. Options to choose from are

Dynamic IP

and

Static IP

.

IP Address:

After selecting the

Static IP

option as the address mode, enter the

static IPv6 address here.

User Name:

Enter the IPv6 PPPoE username here.

Password:

Enter the IPv6 PPPoE password here.

Verify Password:

Enter the IPv6 PPPoE password here again to verify.

Service Name:

Enter the service name here. This field is optional.

Reconnect Mode:

Select this reconnect mode here. Options to choose from are

Always on

,

On demand

, and

Manual

.

Maximum Idle Time:

Enter the maximum idle time value here.

MTU:

Enter the Maximum Transmission Unit (MTU) value here.

In this section, the following parameters can be configured:

Obtain IPv6 DNS Servers automatically:

Select this option to allow the router to

automatically obtain IPv6 DNS server IP addresses.

Use the following IPv6 DNS Server:

Select this option to manually enter the IPv6

DNS server IP addresses.

Primary DNS Server:

Enter the primary IPv6 DNS server address here.

Secondary DNS Server:

Enter the secondary IPv6 DNS server address here.

Page 83 / 186

Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual

Web User Interface Configuration

Page 83

In this section, the following parameters can be configured:

Enable DHCP-PD:

Tick this option to enable the DHCP Prefix Delegation feature.

LAN IPv6 Address:

Enter the LAN IPv6 address here.

LAN IPv6 Link-Local Address:

This field will display the LAN IPv6 link-local

address.

In this section, the following parameters can be configured:

Enable Automatic IPv6 address assignment:

Tick this option to enable automatic

IPv6 address assignment.

Autoconfiguration Type:

Select the IPv6 auto-configuration type here. Options to

choose from are

SLAAC+RDNSS

,

SLAAC+Stateless DHCP

, and

Stateful

DHCPv6

.

Router Advertisement Lifetime:

After selecting

SLAAC+RDNSS

as the auto-

configuration type, enter the router advertisement lifetime value here.

Click the

Save Settings

button to accept the changes made.

Click the

Don’t Save Settings

button to discard the changes made.

In this section, the following parameters can be configured:

Enable Automatic IPv6 address assignment:

Tick this option to enable automatic

IPv6 address assignment.

Autoconfiguration Type:

Select the IPv6 auto-configuration type here. Options to

choose from are

SLAAC+RDNSS

,

SLAAC+Stateless DHCP

, and

Stateful

DHCPv6

.

Router Advertisement Lifetime:

After selecting

SLAAC+Stateless DHCP

as the

auto-configuration type, enter the router advertisement lifetime value here.

Click the

Save Settings

button to accept the changes made.

Click the

Don’t Save Settings

button to discard the changes made.

Page 84 / 186

Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual

Web User Interface Configuration

Page 84

In this section, the following parameters can be configured:

Enable Automatic IPv6 address assignment:

Tick this option to enable automatic

IPv6 address assignment.

Autoconfiguration Type:

Select the IPv6 auto-configuration type here. Options to

choose from are

SLAAC+RDNSS

,

SLAAC+Stateless DHCP

, and

Stateful

DHCPv6

.

IPv6 Address Range (Start):

After selecting

Stateful DHCPv6

as the auto-

configuration type, enter the starting IPv6 address and prefix for the range

here.

IPv6 Address Range (End):

After selecting

Stateful DHCPv6

as the auto-

configuration type, enter the ending IPv6 address and prefix for the range here.

IPv6 Address Lifetime:

After selecting

Stateful DHCPv6

as the auto-configuration

type, enter the IPv6 address lifetime value here.

Click the

Save Settings

button to accept the changes made.

Click the

Don’t Save Settings

button to discard the changes made.

IPv6 Connection Type – IPv6 in IPv4 Tunnel

In this section, the following parameters can be configured:

My IPv6 Connection is:

Select the IPv6 Internet connection type that will be used

by this router. Options to choose from are

Auto Detection

,

Static IPv6

,

Auto-

configuration (SLAAC/DHCPv6)

,

PPPoE

,

IPv6 in IP4 Tunnel

,

6to4

,

6rd

, and

Local Connectivity Only

. In this section we’ll discuss the

IPv6 in IPv4 Tunnel

option.

In this section, the following parameters can be configured:

Remote IPv4 Address:

Enter the remote IPv4 address here.

Remote IPv6 Address:

Enter the remote IPv6 address here.

Local IPv4 Address:

Enter the local IPv4 address here.

Local IPv6 Address:

Enter the local IPv6 address here.

Subnet Prefix Length:

Enter the subnet prefix length value here.

Page 85 / 186

Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual

Web User Interface Configuration

Page 85

In this section, the following parameters can be configured:

Obtain IPv6 DNS Servers automatically:

Select this option to allow the router to

automatically obtain IPv6 DNS server IP addresses.

Use the following IPv6 DNS Server:

Select this option to manually enter the IPv6

DNS server IP addresses.

Primary DNS Server:

Enter the primary IPv6 DNS server address here.

Secondary DNS Server:

Enter the secondary IPv6 DNS server address here.

In this section, the following parameters can be configured:

Enable DHCP-PD:

Tick this option to enable the DHCP Prefix Delegation feature.

LAN IPv6 Address:

Enter the LAN IPv6 address here.

LAN IPv6 Link-Local Address:

This field will display the LAN IPv6 link-local

address.

In this section, the following parameters can be configured:

Enable Automatic IPv6 address assignment:

Tick this option to enable automatic

IPv6 address assignment.

Autoconfiguration Type:

Select the IPv6 auto-configuration type here. Options to

choose from are

SLAAC+RDNSS

,

SLAAC+Stateless DHCP

, and

Stateful

DHCPv6

.

Router Advertisement Lifetime:

After selecting

SLAAC+RDNSS

as the auto-

configuration type, enter the router advertisement lifetime value here.

Click the

Save Settings

button to accept the changes made.

Click the

Don’t Save Settings

button to discard the changes made.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share