1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DSL-2890AL
    5. /
  5. 16
Page 76 / 186 Scroll up to view Page 71 - 75
Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration
Page 76
In this section, the following parameters can be configured:
Enable Automatic IPv6 address assignment:
Tick this option to enable automatic
IPv6 address assignment.
Enable Automatic DHCP-PD in LAN:
Tick this option to enable automatic DHCP-
PD in LAN.
Autoconfiguration Type:
Select the IPv6 auto-configuration type here. Options to
choose from are
SLAAC+RDNSS
,
SLAAC+Stateless DHCP
, and
Stateful
DHCPv6
.
Router Advertisement Lifetime:
After selecting
SLAAC+Stateless DHCP
as the
auto-configuration type, enter the router advertisement lifetime value here.
Click the
Save Settings
button to accept the changes made.
Click the
Don’t Save Settings
button to discard the changes made.
In this section, the following parameters can be configured:
Enable Automatic IPv6 address assignment:
Tick this option to enable automatic
IPv6 address assignment.
Enable Automatic DHCP-PD in LAN:
Tick this option to enable automatic DHCP-
PD in LAN.
Autoconfiguration Type:
Select the IPv6 auto-configuration type here. Options to
choose from are
SLAAC+RDNSS
,
SLAAC+Stateless DHCP
, and
Stateful
DHCPv6
.
IPv6 Address Range (Start):
After selecting
Stateful DHCPv6
as the auto-
configuration type, enter the starting IPv6 address and prefix for the range
here.
IPv6 Address Range (End):
After selecting
Stateful DHCPv6
as the auto-
configuration type, enter the ending IPv6 address and prefix for the range here.
IPv6 Address Lifetime:
After selecting
Stateful DHCPv6
as the auto-configuration
type, enter the IPv6 address lifetime value here.
Click the
Save Settings
button to accept the changes made.
Click the
Don’t Save Settings
button to discard the changes made.
Page 77 / 186
Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration
Page 77
IPv6 Connection Type – Static IPv6
In this section, the following parameters can be configured:
My IPv6 Connection is:
Select the IPv6 Internet connection type that will be used
by this router. Options to choose from are
Auto Detection
,
Static IPv6
,
Auto-
configuration (SLAAC/DHCPv6)
,
PPPoE
,
IPv6 in IP4 Tunnel
,
6to4
,
6rd
, and
Local Connectivity Only
. In this section we’ll discuss the
Static IPv6
option.
In this section, the following parameters can be configured:
Use Link-Local Address:
Tick this option to use the link-local address.
IPv6 Address:
After choosing not to use the link-local address, enter the IPv6
address here.
Subnet Prefix Length:
After choosing not to use the link-local address, enter the
subnet prefix length value here.
Default Gateway:
Enter the default gateway IPv6 address here.
Primary DNS Server:
Enter the primary IPv6 DNS server address here.
Secondary DNS Server:
Enter the secondary IPv6 DNS server address here.
In this section, the following parameters can be configured:
LAN IPv6 Address:
Enter the LAN IPv6 address here.
LAN IPv6 Link-Local Address:
This field will display the LAN IPv6 link-local
address here.
Page 78 / 186
Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration
Page 78
In this section, the following parameters can be configured:
Enable Automatic IPv6 address assignment:
Tick this option to enable automatic
IPv6 address assignment.
Autoconfiguration Type:
Select the IPv6 auto-configuration type here. Options to
choose from are
SLAAC+RDNSS
,
SLAAC+Stateless DHCP
, and
Stateful
DHCPv6
.
Router Advertisement Lifetime:
After selecting
SLAAC+RDNSS
as the auto-
configuration type, enter the router advertisement lifetime value here.
Click the
Save Settings
button to accept the changes made.
Click the
Don’t Save Settings
button to discard the changes made.
In this section, the following parameters can be configured:
Enable Automatic IPv6 address assignment:
Tick this option to enable automatic
IPv6 address assignment.
Autoconfiguration Type:
Select the IPv6 auto-configuration type here. Options to
choose from are
SLAAC+RDNSS
,
SLAAC+Stateless DHCP
, and
Stateful
DHCPv6
.
Router Advertisement Lifetime:
After selecting
SLAAC+Stateless DHCP
as the
auto-configuration type, enter the router advertisement lifetime value here.
Click the
Save Settings
button to accept the changes made.
Click the
Don’t Save Settings
button to discard the changes made.
Page 79 / 186
Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration
Page 79
In this section, the following parameters can be configured:
Enable Automatic IPv6 address assignment:
Tick this option to enable automatic
IPv6 address assignment.
Autoconfiguration Type:
Select the IPv6 auto-configuration type here. Options to
choose from are
SLAAC+RDNSS
,
SLAAC+Stateless DHCP
, and
Stateful
DHCPv6
.
IPv6 Address Range (Start):
After selecting
Stateful DHCPv6
as the auto-
configuration type, enter the starting IPv6 address and prefix for the range
here.
IPv6 Address Range (End):
After selecting
Stateful DHCPv6
as the auto-
configuration type, enter the ending IPv6 address and prefix for the range here.
IPv6 Address Lifetime:
After selecting
Stateful DHCPv6
as the auto-configuration
type, enter the IPv6 address lifetime value here.
Click the
Save Settings
button to accept the changes made.
Click the
Don’t Save Settings
button to discard the changes made.
IPv6 Connection Type – Auto-configuration (SLAAC/DHCPv6)
In this section, the following parameters can be configured:
My IPv6 Connection is:
Select the IPv6 Internet connection type that will be used
by this router. Options to choose from are
Auto Detection
,
Static IPv6
,
Auto-
configuration (SLAAC/DHCPv6)
,
PPPoE
,
IPv6 in IP4 Tunnel
,
6to4
,
6rd
, and
Local Connectivity Only
. In this section we’ll discuss the
Auto-configuration
(SLAAC/DHCPv6)
option.
In this section, the following parameters can be configured:
Obtain IPv6 DNS Servers automatically:
Select this option to allow the router to
automatically obtain IPv6 DNS server IP addresses.
Use the following IPv6 DNS Server:
Select this option to manually enter the IPv6
DNS server IP addresses.
Primary DNS Server:
Enter the primary IPv6 DNS server address here.
Secondary DNS Server:
Enter the secondary IPv6 DNS server address here.
Page 80 / 186
Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration
Page 80
In this section, the following parameters can be configured:
Enable DHCP-PD:
Tick this option to enable the DHCP Prefix Delegation feature.
LAN IPv6 Address:
Enter the LAN IPv6 address here.
LAN IPv6 Link-Local Address:
This field will display the LAN IPv6 link-local
address.
In this section, the following parameters can be configured:
Enable Automatic IPv6 address assignment:
Tick this option to enable automatic
IPv6 address assignment.
Enable Automatic DHCP-PD in LAN:
Tick this option to enable automatic DHCP-
PD in LAN.
Autoconfiguration Type:
Select the IPv6 auto-configuration type here. Options to
choose from are
SLAAC+RDNSS
,
SLAAC+Stateless DHCP
, and
Stateful
DHCPv6
.
Router Advertisement Lifetime:
After selecting
SLAAC+RDNSS
as the auto-
configuration type, enter the router advertisement lifetime value here.
Click the
Save Settings
button to accept the changes made.
Click the
Don’t Save Settings
button to discard the changes made.

Rate

4 / 5 based on 1 vote.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top