D-Link DSL-2870B Dual Band Wireless N750 Gigabit ADSL2+ Modem Router User Manual
Error! Use the Home tab to apply
标题
1 to the text that you want to appear
here.
Page 21
Software Upgrader
1. Tap the
Software Upgrader
to start upgrade firmware for router.
Note
: When performing a firmware upgrade, you need to make sure that the router or
mobile device can access internet.
2. The D-Link One Touch will login router, if login router is fail, the D-Link One touch
will pop-up a login UI, you need enter correct username and password to login the
router.
Page 22 / 143
D-Link DSL-2870B Dual Band Wireless N750 Gigabit ADSL2+ Modem Router User Manual
Error! Use the Home tab to apply
标题
1 to the text that you want to appear
here.
Page 22
3. If the router is not the latest firmware version, then D-Link One Touch will
download it.
4. The latest firmware download is complete; the Download Completed dialog will be
pop-up, tap
OK
button to upgrade the latest firmware for the router.
Page 23 / 143
D-Link DSL-2870B Dual Band Wireless N750 Gigabit ADSL2+ Modem Router User Manual
Error! Use the Home tab to apply
标题
1 to the text that you want to appear
here.
Page 23
5. Uploading the firmware for the router.
6. Upload Completed dialog will be pop-up, tap
OK
button to exit the D-Link One
Touch, and wait a few minutes for
the firmware upgrade is complete.
Page 24 / 143
D-Link DSL-2870B Dual Band Wireless N750 Gigabit ADSL2+ Modem Router User Manual
Error! Use the Home tab to apply
标题
1 to the text that you want to appear
here.
Page 24
Getting Started
This section will show you how to set up and configure your new D-Link router using the Web-based configuration utility.
How to connect to the Web User Interface
Connect to the Router
To configure the WAN connection used by the router it is first necessary to communicate with the router through its management interface, which is HTML-based and can be
accessed using a web browser. The easiest way to make sure your computer has the correct IP settings is to configure it to use the DHCP server in the router.
To access the web user interface, open a web-browser such as Internet Explorer and
enter the IP address of the router (
192.168.1.1
) into the address bar and press the
Enter
key on your keyboard.
Type “
admin
”
in the User Name field
and “
admin
” in the Password field
, and click the
Login
button to proceed. If you get a
Page Cannot be Displayed
error, please refer to
the Troubleshooting section for assistance.
Page 25 / 143
D-Link DSL-2870B Dual Band Wireless N750 Gigabit ADSL2+ Modem Router User Manual
Error! Use the Home tab to apply
标题
1 to the text that you want to appear
here.
Page 25
Web User Interface Configuration
After successfully logging into the Web User Interface, the following page will be displayed. This page is divided into clickable components that make the configuration of this
device easier and more understandable.
The top menu lists out the
Categories
available for configuration. The categories
available to configure on this device are
Setup
,
Advanced
,
Maintenance
,
Status
and
Help
.
The left menu lists out the
Pages
available, for each individual category, for
configuration. In this example, we observe the pages available in the
Setup
category.
The pages available here are
Wizard
,
WAN Service
,
Wireless 2.4G
,
Wireless 5G
,
Local Network
,
IPv6 Autoconfig
, and
Time and Date
.
Every category will have an
Internet Offline
option at the bottom of all the pages.
This option can be used to display the internet status.
Every category will have a
Logout
option at the bottom of all the pages. This option
can be used to log out from the web user interface and also close the browser.
Every category will have a
Reboot
option at the bottom of all the pages. This option
19216811.live