Page 51 / 87
Scroll up to view Page 46 - 50
Click
Add
. The page shown in the following figure appears.
Enter the use name and MAC address and select the corresponding time and
days.
Click
Apply
to add the MAC address to the
BLOCK MAC ADDRESS
table. The
page shown in the following figure appears.
DSL-2730U User Manual
48
Page 52 / 87
4.4.6
Filtering Options
Choose
ADVANCED
>
Filtering Options
. The
Filtering Options
page shown
in the following figure appears.
4.4.6.1 Inbound IP Filtering
In the
Filtering Options
page, click
Inbound IP Filtering
. The page shown in
the following figure appears.
DSL-2730U User Manual
49
Page 53 / 87
Click
Add
to add an inbound IP filter. The page shown in the following figure
appears.
Enter the
Filter Name
and specify at least one of the following criteria: protocol,
source/destination IP address, subnet mask, and source/destination port.
Click
Apply
to save the settings.
The
ACTIVE INBOUND FILTER
shows detailed information about each created
inbound IP filter.
Note:
The settings only apply when the firewall is enabled.
DSL-2730U User Manual
50
Page 54 / 87
4.4.6.2 Outbound IP Filtering
By default, all outgoing IP traffic from the LAN is allowed. The outbound filter
allows you to create a filter rule to block outgoing IP traffic by specifying a filter
name and at least one condition.
In the
Filtering Options
page, click
Outbound IP Filtering
. The page shown in
the following figure appears.
Click
Add
to add an outbound IP filter. The page shown in the following figure
appears.
Enter the
Filter Name
and specify at least one of the following criteria: protocol,
source/destination IP address, subnet mask, and source/destination port. Click
Apply
to save the settings.
The
ACTIVE OUTGOING IP FILTER
shows detailed information about each
created outbound IP filter.
DSL-2730U User Manual
51
Page 55 / 87
4.4.6.3 Bridge Filtering
In the
Filtering Options
page, click
Bridge Filtering
. The page shown in the
following figure appears. This page is used to configure bridge parameters. In
this page, you can change the settings or view some information of the bridge
and its attached ports.
DSL-2730U User Manual
52
19216811.live