Page 46 / 87
Scroll up to view Page 41 - 45
Click
Apply
to save the settings.
The page shown in the following figure
appears. A virtual server is added.
4.4.3
Port Triggering
DSL-2730U User Manual
43
Some applications require that specific ports in the firewall of the device are
open for the remote parties to access. Application rules dynamically open the
firewall ports when an application on the LAN initiates a TCP/UDP connection to
a remote party using the trigger ports. The device allows the remote party from
the WAN side to establish new connections back to the application on the LAN
side using the firewall ports. A maximum of 32 entries can be configured.
Choose
ADVANCED
>
Port Triggering
. The page shown in the following figure
appears.
Page 47 / 87
Click
Add
to add a new Port Trigger.
Click the
Select an application
drop-down menu to choose the application you
want to setup for port triggering. When you have chosen an application the
default Trigger settings will populate the table below.
If the application you want to setup isn’t listed, click the
Custom application
radio button and type in a name for the trigger in the Custom application field.
Configure the
Trigger Port Start
,
Trigger Port End
,
Trigger Protocol
,
Open
Port Start
,
Open Port End
and
Open Protocol
settings for the port trigger you
want to configure.
When you have finished click the
Apply
button.
DSL-2730U User Manual
44
Page 48 / 87
4.4.4
DMZ
Since some applications are not compatible with NAT, the device supports the
use of a DMZ IP address for a single host on the LAN. This IP address is not
protected by NAT and it is visible to agents on the Internet with the correct type
of software. Note that any client PC in the DMZ is exposed to various types of
security risks. If you use the DMZ, take measures (such as client-based virus
protection) to protect the remaining client PCs on your LAN from possible
contamination through DMZ.
Choose
ADVANCED
>
DMZ
. The page shown in the following figure appears.
Click
Apply
to save the settings.
4.4.5
Parental Control
Choose
ADVANCED
>
Parental Control
. The
Parent Control
page shown in
the following figure appears.
This page provides two useful tools for restricting the Internet access.
Block
Websites
allows you to quickly create a list of all websites that you wish to stop
users from accessing.
Block MAC Address
allows you to control when clients
or PCs connected to the device are allowed to access the Internet.
DSL-2730U User Manual
45
Page 49 / 87
4.4.5.1 Block Website
In the
Parent Control
page, click
Block Website
. The page shown in the
following figure appears.
Click
Add
. The page shown in the following page appears.
Enter the website in the
URL
field. Select the
Schedule
from drop-down list, or
select
Manual Schedule
and select the corresponding time and days.
DSL-2730U User Manual
46
Page 50 / 87
Click
Apply
to add the website to the
BLOCK WEBSITE
table.The page shown
in the following figure appears.
4.4.5.2 Block MAC Address
In the
Parent Control
page, click
Block MAC Address
. The page shown in the
following figure appears.
DSL-2730U User Manual
47
19216811.live