If you want to configure the Internet settings of you new D-Link Router manually, click
Manual Wireless Connection Setup
. It will redirect to 4.4.1 Wireless Settings.
4.3.3.4 WPS Reset to Unconfigured
28
d.
In
Wireless Connection
page, Click
Reset to Unconfigured,
the page shown
in the following figure appears.
Once the “
Reset to Unconfigured
” button is clicked, the “wireless settings”
will be reset to factory default, other settings will remain unchange
Page 32 / 88
DSL-2730B User Manual
4.3.4
Local Network
You can configure the LAN IP address according to the actual application. The preset IP address is 192.168.1.1. You can use the default settings and DHCP service to
manage the IP settings for the private network. The IP address of the device is the base address used for DHCP. To use the device for DHCP on your LAN, the IP
address pool used for DHCP must be compatible with the IP address of the device. The IP address available in the DHCP IP address pool changes automatically if you
change the IP address of the device.
You can also enable the secondary LAN IP address. The two LAN IP addresses must be in different networks.
Choose
Setup
>
Local Network
. The
Local Network
page shown in the
following figure appears.
29
Page 33 / 88
DSL-2730B User Manual
By default,
Enable DHCP Server
is selected for the Ethernet LAN
interface of the device. DHCP service supplys IP settings to workstations
configured to automatically obtain IP settings that are connected to the
device through the Ethernet port. When the device is used for DHCP, it
becomes the default gateway for DHCP client connected to it. If you
change the IP address of the device, you must also change the range of IP
addresses in the pool used for DHCP on the LAN. The IP address pool
can contain up to 253 IP addresses.
Click
Apply
to save the settings.
In the
Local Network
page, you can assign IP addresses on the LAN to
specific individual computers based on their MAC addresses.
Click
Add
to add static DHCP (optional). The page shown in the following
figure appears.
Select
Enable
to reserve the IP address for the designated PC with the
configured MAC address.
The
Computer Name
helps you to recognize the PC with the MAC
address. For example, Father’s Laptop.
Click
Apply
to save the settings.
After the DHCP reservation is saved, the DHCP reservations list displays
the configuration.
If the DHCP reservations list table is not empty, you can select one or
more items and click
Edit
or
Delete
.
30
Page 34 / 88
DSL-2730B User Manual
4.3.5
Time and Date
Choose
Setup
>
Time and Date
. The page shown in the following figure
appears.
In the
Time and Date
page, you can configure, update, and maintain the correct
time on the internal system clock. You can set the time zone that you are in and
the network time protocol (NTP) server. You can also configure daylight saving
to automatically adjust the time when needed.
Select Automatically synchronize with Internet time servers.
Select the specific time server and the time zone from the corresponding
drop-down lists.
Select Enable manual Daylight Saving,overwrite automatic rule if necessary.
Set the daylight as you want.
Click
Apply
to save the settings.
31
Page 35 / 88
DSL-2730B User Manual
4.3.6
Logout
Choose
Setup
>
Logout
. The page shown in the following figure appears. In
this page, you can log out of the configuration page.
19216811.live