Page 16 / 88
Scroll up to view Page 11 - 15
DSL-2730B User Manual
Set the user name and password as provided by your ISP.
Page 17 / 88
DSL-2730B User Manual
If the
Protocol
is
Static IP
, the page shown in the figure appears.
Enter the IP Address, Subnet Mask, Default Gateway, and Primary DNS Server.
Page 18 / 88
DSL-2730B User Manual
After proper configuration, click
Next
.
Page 19 / 88
DSL-2730B User Manual
Configure the wireless network, or keep the default settings. Enter the
information and click
Next
.
Enable Your Wireless Network
: Enable wireless settings on LAN interface.
Wireless Network Name (SSID)
: SSID is the name of your wireless
network. All wireless-equipped devices share the same SSID to
communicate with each other. It must be unique to identify separated
wireless network. For security, you should change the default SSID to a
special ID.
Visibility Status
: You can select visible or invisible.
Security Level
: In order to protect your network from hackers and
unauthorized users, it is highly recommended you choose one of the
following wireless network security settings.
WPA Pre-Shared Key
: Please set it. Then you will need to enter the same
key here into your wireless clients in order to enable proper wireless
connection.
Page 20 / 88
DSL-2730B User Manual
The page shown in the right figure appears. In this page, you can view the
configuration information. You can check weather the configurations match the
information provided by your ISP.
17
19216811.live