Page 26 / 109
Scroll up to view Page 21 - 25
Section 3 – Configuration
D-Link DSL-2642B User Manual
25
Internet Setup
To access the
Internet Setup
window, click
Internet Setup
in the
Setup
directory.
In this page, all available WAN connection displays in the table. Click the
corresponding
button to edit the connection. Click the
corresponding
button to delete the connection.
Click the
Add
button to see the window in the next page for adding a
WAN connection.
Page 27 / 109
Section 3 – Configuration
D-Link DSL-2642B User Manual
26
PPP over Ethernet (PPPoE)
VPI:
Enter the correct VPI used here.
VCI:
Enter the correct VCI used here.
Select DSL Link Type:
Select the correct DSL Link Type here. For
PPPoE, IPoE and Bridge Modes, select EoA.
Encapsulation Mode:
Choose the appropriate Encapsulation Mode
here.
Service Category:
Choose the appropriate Service Category here.
Enable Quality of Service:
Tick this option to enable Quality of Service.
Select WAN service type:
Choose the appropriate WAN Service Type
here. Click the
PPP over Ethernet (PPPoE)
radio button to configure
PPPoE mode.
Enter Service Description:
This field will display an automated service
description.
Enable IPv6 for this service:
Tick this option to enable IPv6.
Page 28 / 109
Section 3 – Configuration
D-Link DSL-2642B User Manual
27
PPP Username:
Enter the account username in here.
PPP Password:
Enter the account password in here.
PPPoE Service Name:
Enter the service name here (optional).
Authentication Method:
Choose the appropriate authentication method
here. If not sure leave this option on
Auto
.
Enable NAT:
Tick this option to enable NAT for this connection.
Enable Fullcone NAT:
Tick this option to enable Fullcone NAT for this
connection.
Enable Firewall:
Tick this option to enable firewall for this connection.
Dial on demand:
Tick this option to enable dial on demand for this
connection.
Inactivity Timeout:
The option appears when
Dial on demand
is
selected. Enter an inactivity timeout value here. Leave this option on 0 to
disable this option.
Use Static IPv4 Address:
Tick this option to use a Static IP version 4
address for this connection.
IPv4 Address:
The option appears when
Use Static IPv4 Address
is
selected. Enter the Static IP version 4 address used here.
Bridge PPP Frames Between WAN and Local Ports:
Tick this option
to bridge PPPoE frames between WAN and local ports.
Enable IGMP Multicast:
Tick this option to allow IGMP packets to go
through the WAN interface in both directions.
Page 29 / 109
Section 3 – Configuration
D-Link DSL-2642B User Manual
28
Selected WAN Interface:
Use the drop-down menu to choose the WAN
interface to use this connection.
Obtain DNS info from a WAN interface:
Click the radio button to obtain
DNS Server IP addresses automatically from the ISP.
User the following Static DNS IP address:
click the radio button to
manually enter the Primary and Secondary DNS Server IP addresses for
this connection.
Click the
Apply
button to accept these changes.
Click the
Cancel
button to discard these changes.
Page 30 / 109
Section 3 – Configuration
D-Link DSL-2642B User Manual
29
IP over Ethernet (IPoE)
VPI:
Enter the correct VPI used here.
VCI:
Enter the correct VCI used here.
Select DSL Link Type:
Select the correct DSL Link Type here. For
PPPoE, IPoE and Bridge Modes, select EoA.
Encapsulation Mode:
Choose the appropriate Encapsulation Mode
here.
Service Category:
Choose the appropriate Service Category here.
Enable Quality of Service:
Tick this option to enable Quality of Service.
Select WAN service type:
Choose the appropriate WAN Service Type
here. Click the
IP over Ethernet
radio button to configure IPoE mode.
Enter Service Description:
This field will display an automated service
description.
Enable IPv6 for this service:
Tick this option to enable IPv6.
19216811.live