Page 71 / 91
Scroll up to view Page 66 - 70
Web Configuration
D-Link DSL-2640B User Manual
67
Static Route
Choose
ADVANCED
>
Routing
and click
Static Route
. The page as shown in the figure
appears. This page displays the information of existing static routes.
Click
Add
and the page as shown in the figure appears.
The table describes the parameters in this page.
Field
Description
Destination
Network
Address
The destination IP address of the device.
Subnet Mask
The subnet mask of the destination IP address.
Use
Gateway
IP
Address
The gateway IP address of the device.
Use Interface
Select the interface of the static routing used by the
device from the drop-down list.
Note:
You can enter the gateway IP address of the device in the
Use Gateway IP
Address
field or set the
User Interface
, but cannot apply the two settings at the
same time.
Click
Apply
to save the settings.
Page 72 / 91
Web Configuration
D-Link DSL-2640B User Manual
68
Default Gateway
Choose
ADVANCED
>
Routing
and click
Default Gateway
. The page as shown in the
figure appears.
In this page, you can select
Enable Automatic Assigned Default Gateway
, or enter the
information in the
Use Gateway IP Address
and
Use Interface
fields. Click
Apply
to save
the settings.
RIP
Choose
ADVANCED
>
Routing
and click
RIP
. The page shown in the following figure
appears. This page is used to select the interfaces on your device that use RIP and the
version of the protocol used.
If you are using this device as a RIP-enabled device to communicate with others using
the routing information protocol, enable RIP and click
Apply
to save the settings.
Page 73 / 91
Web Configuration
D-Link DSL-2640B User Manual
69
Schedules
Choose
ADVANCED
>
Schedules
. The page as shown in the figure appears.
Click
Add
to add a schedule rule. The page as shown in the figure appears.
The table describes the parameters in this page.
Field
Description
Name
Set the name of the schedule.
Day(s)
You can select one, more, or all of the seven days in a
week.
All Day – 24 hrs
If you select the check box, the rule applies throughout
the 24 hours of the day.
Start Time
Set the start time of the firewall.
End Time
Set the end time of the firewall.
Click
Apply
to save the settings.
Page 74 / 91
Web Configuration
D-Link DSL-2640B User Manual
70
MAINTENANCE
System
Choose
MAINTENANCE
>
System MAINTENANCE
. The
System
page as shown in the
figure appears.
In this page, you can restart the device, back up the current settings to a file, update the
backup file, and restore the factory default settings.
The table describes the buttons in this page.
Button
Description
Reboot
Restart the device.
Backup Settings
Specify the path to back up the current configuration in a
configuration file on your computer. You can rename the
configuration file.
UPDATE SETTINGS
Click
Browse…
to select the configuration file of device
and click
Update Settings
to update the configuration of
the device.
Restore
Default
Settings
Reset the device to default settings.
Caution:
Do not turn off your device or press the Reset button when the procedure is in
progress.
Page 75 / 91
Web Configuration
D-Link DSL-2640B User Manual
71
Firmware Update
Choose
MAINTENANCE
>
Firmware Update
. The page as shown in the figure appears.
In this page, you can upgrade the firmware of the device. To update the firmware, do as
follows:
Step 1
Click
Browse…
to select the file.
Step 2
Click
Update Firmware
to update the configuration file.
The device loads the file and reboots automatically.
Caution:
Do not turn off your device or press the Reset button when the procedure is in
progress.
19216811.live