Select a name for the preset application, or enter a name in the
Custom application
field.
Enter the trigger port and select the
Trigger Protocol
.
Click
Apply
to save the settings.
Page 47 / 91
Web Configuration
D-Link DSL-2640B User Manual
43
DMZ
Since some applications are not compatible with NAT, the device supports the use of a DMZ IP address for a single host on the LAN. This IP address is not protected by
NAT and it is visible to agents on the Internet with the correct type of software. Note that any client PC in the DMZ is exposed to various types of security risks. If you use
the DMZ, take measures (such as client-based virus protection) to protect the remaining client PCs on your LAN from possible contamination through DMZ.
Choose
ADVANCED
>
DMZ
. The page shown in the right figure appears.
Click
Apply
to save the settings.
Parental Control
Choose
ADVANCED
>
Parental Control
. The
Parent Control
page shown in the right
figure appears.
Page 48 / 91
Web Configuration
D-Link DSL-2640B User Manual
44
Block Website
In the
Parent Control
page, click
Block Website
. The page shown in the right figure
appears.
Click
Add
. The page shown in the right page appears.
Enter the website in the
URL
field. Select the
Schedule
from drop-down list, or select
Manual Schedule
and select the corresponding time and days.
Click
Apply
to add the website to the
BLOCK WEBSITE Table
.
Page 49 / 91
Web Configuration
D-Link DSL-2640B User Manual
45
Block MAC Address
In the
PARENT CONTROL
page, click
Block MAC Address
. The page as shown in the
figure appears.
Page 50 / 91
Web Configuration
D-Link DSL-2640B User Manual
46
Click
Add
. The page as shown in the following figure appears.
The table describes the parameters in this page.
Field
Description
User Name
Enter the name that identifies your configuration. For
example,
kids
.
Current
PC’s
MAC
Address
Enter the MAC address of the computer that connects to
the device.
Other MAC Address
Enter the MAC address of another device that is included
in MAC filtering.
Schedule
Select the time of MAC filter from the drop-down list. You
can select
always
or
never
.
Manual Schedule
If you select this check box, you need to manually set the
time of MAC filtering.
Enter the use name and MAC address. Select the corresponding time and days. Then,
19216811.live