Page 16 / 64
Scroll up to view Page 11 - 15
16
D-Link DSL-±3±0B ADSL±+ Ethernet/USB Modem User Manual
Section 6 - Log In To The Modem
Log in to the Modem
This section will explain how to log in to your modem using the following steps:
1. Launch your web browser.
±. Enter the URL http://19±.168.1.1 in the address bar and press
Enter
.
A login screen like the one below will be displayed after you connect to the user interface.
3. Enter your user name and password, and then click
OK
to display the user interface.
Note:
There are three account types, each requiring
a different username and password.
• The user account provides limited access to
certain configurations (username / password:
user / user
).
• The admin account can perform all functions
(username / password:
admin / admin
).
• The support account is for ISP technicians for
maintenance purposes
(username / password:
support / support
).
Note:
Passwords can be changed at any time.
Note:
This manual has been prepared using the admin user name.
Page 17 / 64
17
D-Link DSL-±3±0B ADSL±+ Ethernet/USB Modem User Manual
Section 7 - Home
Home
The home section provides configurations for general use, including a Quick Setup Wizard with steps to quickly set
up your modem for Internet connection. Also included in this section are LAN/WAN setup and DNS configuration. The
next sections explain the setup for each.
Wizard
This section will explain how to quickly configure the modem if your only intention is to access the Internet.
ATM PVC Configuration
To enable the auto-connect process, click on the box labeled
DSL Auto-connect
, a process that will automatically
detect the first usable PVC and automatically detect PPPoE, PPPoA, and Bridge Protocol (with DHCP Server available).
To continue, click on the
Next
button.
Page 18 / 64
18
D-Link DSL-±3±0B ADSL±+ Ethernet/USB Modem User Manual
Section 7 - Home
If you uncheck the
DSL Auto-connect
box, the resulting screen is seen below. Enter the VPI/VCI as indicated by your
ISP. There is also an option to enable Quality of Service. When you are ready, click
Next
to continue.
Page 19 / 64
19
D-Link DSL-±3±0B ADSL±+ Ethernet/USB Modem User Manual
Section 7 - Home
Next is the Connection Type screen where you can select the type of network protocol and encapsulation mode over
the ATM PVC that your ISP has instructed you to use. The following is a PPPoA example. Click
Next
to continue.
Page 20 / 64
±0
D-Link DSL-±3±0B ADSL±+ Ethernet/USB Modem User Manual
Section 7 - Home
Enter the PPP username and password given by your ISP. Then decide if you will be using any features such as dial
on demand, PPP IP extension, keep alive and then click on
Next
.