Page 46 / 64
Scroll up to view Page 41 - 45
46
D-Link DSL-±3±0B ADSL±+ Ethernet/USB Modem User Manual
Section 9 - Tools
Update Settings
To load a previously saved configuration file onto your
modem, click
Browse
, select the file on your computer
and then click on Update Settings.
The modem will restore settings and reboot to activate
the restored settings.
Restore Default Settings
Restore Default Settings will delete all current settings and restore the modem to factory default settings. Click on the
Restore Default Settings
button to proceed. The following confirmation dialog will appear confirming your decision to
restore default settings. Click on
OK
to continue.
Page 47 / 64
47
D-Link DSL-±3±0B ADSL±+ Ethernet/USB Modem User Manual
Section 9 - Tools
Firmware
If your ISP releases new software for this modem, follow these steps to perform an upgrade.
1. Obtain an updated software image file (firmware) from your ISP.
±. Enter the path of the image file location or click the
Browse
button to locate the image file.
3. Click the
Update Software
button once to upload the new image file.
Page 48 / 64
48
D-Link DSL-±3±0B ADSL±+ Ethernet/USB Modem User Manual
Section 9 - Tools
Test
The diagnostics screen allows you to run diagnostic tests to check your DSL connection.
The results will show test
results of three connections:
• Connection to your local network
• Connection to your DSL service provider
• Connection to your Internet service provider
There are three buttons at the bottom of the
page;
Next Connection
(appears only if you
have created more than one connection),
Test
and
Test with OAM F4
(which will allow you to
retest if necessary).
Page 49 / 64
49
D-Link DSL-±3±0B ADSL±+ Ethernet/USB Modem User Manual
Section 10 - Status
Status
The status section allows you to view general and status information for your modem’s connection.
Device Info
The Device Info page shows details of the modem such as the version of the software, bootloader, LAN IP address,
etc. It also displays the current status of your DSL connection.
Page 50 / 64
50
D-Link DSL-±3±0B ADSL±+ Ethernet/USB Modem User Manual
Section 10 - Status
WAN Info
The WAN Info screen displays WAN connections
previously set up in the Home section. There is
an extra “Status” column used
for connection
status information, displaying either ADSL Link
Down or ADSL Link Up.
Route Info
The Route Info section displays route
information showing the IP addresses of the
destination, gateway, and subnet mask as
well as other route information.
19216811.live