Page 6 / 16
Scroll up to view Page 1 - 5
6
Preparing your DP-311P for network
printing in
Windows XP (cont.)
Open your Web
browser
and type
into the URL address
box. Then press the
Enter
or
Return
key.
Follow the steps below to associate the print server to your wireless AP or router.
The SSID of
your wireless AP or router should appear in the list as shown below.
Select
SSID
Apply
Changes
The
factory default IP address
of the DP-311P is
192.168.0.10
.
In order to print
to the your printer through the DP-311P, the DP-311P must have the same IP
network settings as your network.
By factory default, the DP-311P is configured to
connect to “
ANY
” wireless access point.
Click on
Configuration
>
Wireless
.
Page 7 / 16
7
Preparing your DP-311P for network
printing in
Windows XP (cont.)
Click on
Configuration
>
Network
.
Configure your
IP Address
here to conform to your
wireless network.
It is
recommended that you use
a
Static IP Address
.
By
default, the IP Address of
the DP-311P is
192.168.0.10
Apply
Changes
- Move the switch on the back of the DP-311P to
“
Normal
”
mode.
- Remove and re-insert the print servers
power plug
.
- Associate your wireless laptop or desktop computer with
the same
wireless AP or router
as your print server.
Page 8 / 16
8
Setting up your DP-311P for network
printing in
Windows XP
For Windows XP:
Go to Start > Printers and Faxes > Add a Printer
For additional Windows operating system setup or information
on the web-management interface, refer to the manual located
on the CD-ROM.
Click
Next
Double-click
on the
“
Add Printer
”
icon
Page 9 / 16
9
Setting up your DP-311P for network
printing in
Windows XP
(continued)
Select
“Local Printer.”
Select
“Create a new port.”
At the pull-down menu, highlight
“Standard TCP/IP Port.”
Click
Next
Click
Next
Click
Next
Page 10 / 16
10
Setting up your DP-311P for network
printing in
Windows XP
(continued)
Type in the IP address of the print
server.
(i.e.
192.168.0.10
)
The port name will automatically be
filled in.
Select “Custom.”
Then click
“Settings.”
Click
Next
Click
Settings
Click
OK
Enter “
lp1
” for the
Queue Name.
Select “
LPR
”
19216811.live