Given below is full router user manual of D-Link DP-311P router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 1 / 16
1
DP-311P
D-Link Wireless Print
Server
If any of the above items are missing, please contact your reseller.
Before You Begin
Check Your Package Contents
These are the items included with your DP-311P purchase:
You will need an 802.11b wirelessly enabled laptop or desktop computer and a
parallel-port printer that will connect to the DP-311P.
Important: TURN OFF the power to the printer before installing
the DP-31
1P
.
Using a power
supply with a
different voltage
rating will damage
this product and void
its warranty.
This product can be set up using
any current web browser, i.e.,
Internet Explorer 6.x, Netscape
Navigator 7.x.
DP-311P Wireless Print Server
CD-ROM (containing Manual and Warranty)
5V DC 2.0A Power Adapter
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications
subject to change without notice. DP-311P .07032003
Page 2 / 16
2
Antenna:
- Used to
wirelessly connect to
802.11b compatible
devices.
Receptor for
Power Adapter
.
POWER LED
– a solid
light indicates a proper
connection to the power
supply.
Operation Mode Switch
This switch is used to put the DP-311P into configuration mode or normal mode.
WLAN LED
– This LED blinks
during wireless data transmission.
Parallel Port -
Used to
connect to the parallel
port on your printer.
Product Overview
Page 3 / 16
3
Note:
Do not connect the power cord to the DP-311P until
you are advised to do so.
Attach the included antenna to the rear of the DP-311P.
Make sure that the Printer is turned
OFF
.
Connect the DP-311P to the parallel port of the printer.
Plug one end of the power adapter into the DP-311P (in the DC Power
Input port, shown in the illustration above) and the other end into your
electrical outlet.
The DP-311P LED’s will light up to indicate that the
power is connected properly.
Turn
ON
the printer.
Preparing your DP-311P for network
printing in
Windows XP
Move switch to ‘
Config
’
position.
Page 4 / 16
4
Use an 802.11b wireless client card to connect to the DP-311P wirelessly
using the following settings:
SSID:
WLAN-PS
Wireless Mode:
Ad-Hoc
Channel:
1
WEP:
Disable
Preparing your DP-311P for network
printing in
Windows XP (cont.)
For example, with D-Link’s DWL-650+ AirPlus utility, you should see an Available Ad-Hoc
Network by the name of
WLAN-PS
.
Highlight this Network and connect to it.
Page 5 / 16
5
Preparing your DP-311P for network
printing in
Windows XP (cont.)
IP address:
192.168.0.52
Subnet mask:
255.255.255.0
Click
OK
Select
Use the following IP address
Go to
Start
>
right click
on
My Network Places
>
select
Properties
>
Double-click
on
the
Network Connection
associated
with the Wireless Network Card.
Click
Internet Protocol (TCP/IP)
Click
Properties
In order to configure the DP-311P, your computer
must be in the same IP range as the Wireless Print
Server.
The following steps will walk you through
setting a static IP Address in the same range as the
DP-311P.
19216811.live