Page 71 / 88
Scroll up to view Page 66 - 70
67
D-Link DNS-722-4/DNS-726-4 User Manual
Section 3 - Configuration
Save Image
Step 1: During playback, users can choose to save an image from a selected camera.
Step 2: Click the
Save Image
button when the desired image is shown on the screen.
Step 3: Choose the folder where you would like to save the file to.
Step 4: Choose the desired image format (BMP or JPEG).
Step 5: Input the file name.
Step 6: Click the
Save
button.
Note
You may skip step 3 by pre-selecting a folder and format for images. See the “
Setting
” option for more details.
Page 72 / 88
68
D-Link DNS-722-4/DNS-726-4 User Manual
Section 3 - Configuration
Print Image
Step 1: During playback, user can choose to print a selected image.
Step 2: Click the
Print
button when the desired image is shown on the
screen.
Step 3: Select desired print settings.
Page Setting
Step 4: Click the
Print
button.
Print in
original size:
Fit the page:
Align Image:
Print Content:
Select this option to have the image print in original size.
Select this option to fit the image to the page.
Align the top, center or bottom.
Print the image from currently selected channel or all the channels shown
on the screen.
Page 73 / 88
69
D-Link DNS-722-4/DNS-726-4 User Manual
Section 3 - Configuration
Backup the Recorded Video
Unlike the Save Video function, the Backup function will save all the recorded videos during the time period you select,
instead of a single video clip.
Step 1: Use
Open Record to
select the desired data.
Step 2: Click the
Backup
button.
Step 3: Set the
Start Time
and
End Time
that you would like to backup.
Step 4: Select the cameras that you would like to backup.
Step 5: Select the directory where you would
like to backup the data to.
Step 6: Click the
Backup
button.
The system will then begin backup process automatically.
Page 74 / 88
70
D-Link DNS-722-4/DNS-726-4 User Manual
Section 3 - Configuration
Multi-NVR Viewer Application
PTZ Camera
Control:
Zoom:
Minimize:
Exit:
Digital Zoom:
Play / Stop/
Drop:
Information
Display
Window:
Playback:
Snapshot:
Remote I/O:
Control the camera view by utilizing the PTZ
camera control panel to adjust the camera’s view.
This is only available with cameras that support
the PTZ function.
Click the + or - button to zoom in or zoom out the
view.
Minimize the Remote Live Viewer window.
Shut down the application.
Click the icon to digitally zoom in or out.
Select the camera/video and click this button to
play/stop/disconnect a particular channel.
Display video information including server name,
video current status, and bit rate for a selected
channel.
View playback video remotely.
Select the snapshot function to capture a specific
video image immediately.
Users can remotely adjust the external I/O
device.
Step 1: Please insert the product CD.
Step 2: Install the
Live View
application from CD.
Step 3: Run
“Live View”
application from the Start -> Programs -> D-Link -> Multi-NVR Viewer
Page 75 / 88
71
D-Link DNS-722-4/DNS-726-4 User Manual
Section 3 - Configuration
Set Connections to the Units
Step 1: Click the
Site Setup
button.
Step 2: Input the unit name.
Step 3: Input the IP address.
Step 4: Modify the port if necessary.
Step 5: Input the user name.
Step 6: Input the password.
Step 7: Check the
Save Password/
Auto Login
option.
Step 8: Click the
Test Server
button to
test the connection between the local
application and the remote unit.
Step 8: Click the
Add
button to add this
unit into your remote server list.
Step 9: Click the
OK
button.
Set Groups for Cameras
Step 1: Click the
Group
tab.
Step 2: Log in to all the servers that contain the
camera(s) you would like to put into group(s).
Step 3: Click the
Insert
button to create a new group.
Step 4: Name this group.
Step 5: Highlight the camera(s) that you would like
to add into this group and then click the <- button.
Step 6: Repeat step 4 to establish the group.
Step 7: Repeat step 1 through 6
to establish other groups.
Step 8: Click the
OK
button.
Site Setup
19216811.live