52

D-Link DNS-722-4/DNS-726-4 User Manual

Section 3 - Configuration

Help

The NVR Help page provides a list of support topics.

53

D-Link DNS-722-4/DNS-726-4 User Manual

Section 3 - Configuration

Live Video

Setup Live View

Step 1: Click the

LIVE VIDEO

button at the top of the menu.

Step 2: Select a camera(s) from the camera list on the right and then drag it to the location to where you wish the

image to be displayed.

Step 3: Users can change the video display position by drag it to another position.

Note

1. The selected video will be marked with a green line.

2. Right clicking on the video will show the option to

Toggle to Full Screen

. Press the ESC button on the keyboard to return to normal display.

3. If the camera supports audio, users can check

Enable Audio

from the right click menu and listen to live audio of this channel.

4. If the camera supports PTZ, users can control the selected camera from the PTZ panel. Users can also right click on the video and check

Enable Move

to

control the PTZ function directly. Please note that when

Enable Move

is checked, the video will be marked with a red outline. This indicates that another

camera cannot be adjusted until the PTZ function has been deactivated.

This section will enable you to configure and view the live video from your network cameras.

Drag and Drop

or double click

54

D-Link DNS-722-4/DNS-726-4 User Manual

Section 3 - Configuration

Single/Quad

Split Screen:

Snapshot:

Full Screen:

e-map:

PTZ Camera

Control:

Zoom:

User can choose to view a single camera or 4 cameras at a time.

Select the snapshot function to capture a specific video image immediately.

Select to display the video with full screen. Press

ESC

button on the keyboard to return to normal display.

Display your emap file. Max. size 20KBytes of BMP and JPG file.

You may control the camera view by utilizing the PTZ camera control panel to adjust the camera’s view. This is only

available with cameras that support the PTZ function.

Click the

+

or

-

button to zoom in or zoom out. This option is only available with cameras that support the optical zoom

function.

Camera List

1/4/9 Split Screen

Full Screen

Snapshot

PTZ Camera Control

Zoom

e-map

55

D-Link DNS-722-4/DNS-726-4 User Manual

Section 3 - Configuration

Preset:

Digital Zoom:

Play/Stop/Drop:

Information Window:

Remote I/O:

Manual Record:

Setup:

Click the

Set

button to set a preset position for a camera with PTZ support. Users can give the specified position a

name and store it in the preset position list. Click the

Go

button to go to the preset position. This is only available

with cameras that support the PTZ function.

Click the icon to digitally zoom in or out. Any camera can use this function.

Select a camera/ video and click this button to play/stop/disconnect a particular channel.

Display video information including camera name, video status, and bit rate for a selected channel.

Utilize I/O device function remotely. User can remotely adjust the external output device by turning it on or off.

Press this button to recording instantly. Press again to stop manual recording mode. When manual recording

mode start, schedule record mode will be overwrited until manual record stop.

Setup the OSD options.

Preset

Information Window

Play/Stop/Drop

Manual Record / Setup / Remote I/O

Digital Zoom

56

D-Link DNS-722-4/DNS-726-4 User Manual

Section 3 - Configuration

Playback

Play the Recorded Video

Step 1: Be sure that you have set the schedule/recording event first.

Step 2: Click the

PLAYBACK

tab at the top of the menu.

Step 3: Click the

Open Record

button.

Step 4: The

Record Display Window

will show information about the available video clips. Select the date you

would like to find the video records.

Step 5: Highlight the video records that you would like to review.

Step 6: Click the

OK

button.

This feature allows you to search and playback the recorded video.