Page 41 / 86
Scroll up to view Page 36 - 40
41
D-Link DNS-343 User Manual
Section 3 - Configuration
After enabling the iTunes server on the DNS-343, launch iTunes. When iTunes detects the DNS-343, select it and you
will be prompted to enter the iTunes server password if required.
Select the DNS-343. When
prompted, enter in the iTunes
server password. Click
OK
.
Media stored on the DNS-343
will then be available for use in
iTunes.
Page 42 / 86
4±
D-Link DNS-343 User Manual
Section 3 - Configuration
DHCP Server
DHCP Server
Starting IP
Address
Lease Time
The DNS-343 can be used as a DHCP Server.
As a DHCP server, it can be used to serve IP addresses to devices on
your local network. However, this feature should not be enabled if you already have a DHCP server, such as a router
on your local network.
Enables or Disables the DNS-343
DHCP Server.
Enter the starting IP address for the
range of addresses assigned by the
DHCP server.
Ending IP
Address
Enter the ending IP address for the
range of addresses assigned by the
DHCP server.
Sets the duration of time that an IP
address will remain assigned to a
device.
Click on the
Save Settings
button to
apply and save the new settings.
Save Settings
Page 43 / 86
43
D-Link DNS-343 User Manual
Section 3 - Configuration
Change Admin Password
User Name
Password
New Password
Confirm
Password
Maintenance
The Admin menu allows you to set a password for your admin account.
It is recommended to set an admin password
when first configuring your DNS-343.
The administrator user name is
admin,
and this cannot be changed.
Enter the current password. (Leave
this blank if you have not set a
password yet.)
Enter a new password.
Enter the new password again for
confirmation.
Click
Save Settings
to save the new password.
Page 44 / 86
44
D-Link DNS-343 User Manual
Section 3 - Configuration
System
Restart
Defaults
Configuration
Settings
Idle Time
The DNS-343 System menu provides options to perform a system restart, save and load configuration settings, and
set idle times.
Click
Restart
to reboot the DNS-343.
Click
Restore
to reset the DNS-343 to its factory default
settings. This will erase all previous configuration
changes.
Click
Shutdown
to turn off the DNS-343.
Click
Save
to save the current DNS-343 configuration
settings to a file on the local computer. If at a later time
you need to reload this configuration after a system
reset, browse to the file and click
Load
.
Enter the time (in minutes) that the administrator
will be allowed to remain idle while accessing the
DNS-343 configuration settings or that users will be
allowed to remain idle while accessing the download
schedule settings.
Click
Apply
to save the settings.
Shutdown
Apply
Page 45 / 86
4²
D-Link DNS-343 User Manual
Section 3 - Configuration
Firmware
This section allows you to check for new firmware releases and upload them to your device.
To upgrade the DNS-343 firmware, go the D-Link Support
Page and download the latest version. When the download
is completed, use the
Browse
button to locate the firmware
file on your computer and click the
Apply
button to begin
loading the firmware to your device.
19216811.live