1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DNS-343-2TB
    5. /
  5. 8
Page 36 / 86 Scroll up to view Page 31 - 35
3³
D-Link DNS-343 User Manual
Section 3 - Configuration
FTP Server
FTP Server
Settings
The DNS-343 is equipped with a built in FTP Server. The server is easy to configure and allows up to 10 users to access the server locally
or remotely at the same time.
This section contains the configuration
settings for the DNS-343 FTP Server.
Determines whether the FTP server rule will
apply to an individual user or a group.
Select the group or user the FTP server rule
will apply to.
Browse to and select the folder or directory
you are granting FTP access to.
Select
root
to
grant access to all volumes.
Set the user or group permission to Read
Only or Read/Write.
Sets the maximum amount of users that can
connect to the FTP server.
Sets the amount of time a user can remain
idle before being disconnected.
Sets the FTP port.
Default is 21.
Allows you to limit the amount of bandwidth available for each user.
Specify alternate input characters allowed for FTP connection requests.
Category
User / Group
Folder
Permission
Max User
Idle Time
Port
Flow Control
Client Language
Note:
If your Internet access is controlled through a router, or if your network uses a firewall device of any kind, it will likely be necessary to configure the router or
firewall device to allow FTP requests from the Internet. Often it is possible to configure the router to direct FTP traffic to specified devices, in this case, to the DNS-343.
Usually, at a minimum, it is necessary to enter the IP address of the DNS-343 and the TCP port used for FTP (port 21). See the user documentation of the firewall
device or router for information on creating forwarding rules for FTP traffic to devices on the LAN.
FTP Server Settings
Page 37 / 86
3´
D-Link DNS-343 User Manual
Section 3 - Configuration
FTP Server Status
Displays users and/or groups that have
access and their user rights.
Displays if the FTP server is started or
stopped.
Displays the FTP Port.
Displays the maximum number of users.
Displays the flow control status.
Displays the idle time before disconnecting
the user.
Displays the client language set for this FTP
server.
FTP Access
List
Status
Port
Max User
Flow Control
Idle Time
Client
Language
Page 38 / 86
3µ
D-Link DNS-343 User Manual
Section 3 - Configuration
If you are behind a router, you will need to forward the FTP port from the router to the DNS-343.
Additional filtering
and firewall settings may need to be modified on your router to allow FTP Access to the DNS-343 from the Internet.
Once the port has been forwarded on the router, users from the internet will access the FTP server through the WAN
IP address of the router.
If you are using a D-Link router, such as the WBR-2310 used in the example below, your port forwarding rule should
be similar to the following:
Name
Name the DNS-343 FTP server
rule.
IP Address
Enter the IP address of the
DNS-343.
Public Port
Enter the public FTP port.
By
default, the port is 21.
Private Port
Enter the private FTP port.
By
default, the port is 21.
Traffic Type
Set the traffic type to TCP.
If you use an FTP port other than 21, then users accessing the FTP server using an FTP client will have to
specify the non-standard port, and users who are using a browser will have to specify the port in the URL
(e.g. ftp://ftp.dns323.com:3000, where the FTP port is 3000).
FTP Server Behind a Router
Page 39 / 86
3¶
D-Link DNS-343 User Manual
Section 3 - Configuration
UPnP AV Server
UPnP AV
Server
Folder
Select
Enable
or
Disable
to enable
or disable the DNS-343 UPnP AV
server.
The DNS-343 supports media streaming service to UPnP AV compatible clients on the local network. Use the UPnP
AV Server menu to select the media content made available to such clients. By default the UPnP server is enabled. The
root checkbox specifies access to media content on all volumes and folders on the drive. Click on the
Save Settings
button to apply and save the new settings.
Specifies the folder or directory
that will be shared by the UPnP AV
server.
Select
root
to share all files
on all volumes, or click
Browse
to
select a specific folder.
Select the auto refresh mode from
the drop-down menu.
When content is added or deleted from the available folders, click the
Refresh
button and the DNS-343 will scan for
file updates. While the update scan is underway, the AV media will not be available for use by clients on the network.
Auto Refresh
Page 40 / 86
40
D-Link DNS-343 User Manual
Section 3 - Configuration
iTunes Server
iTunes Server
Folder
Password
The DNS-343 features an iTunes Server. This server provides the ability to share music and videos to all the available
computers within your local network. If the server is enabled, the DNS-343 will be automatically detected by the iTunes
program, and the music and videos contained in the specified directory will be available to stream over the network.
Select
Enable
or
Disable
to enable
or disable the DNS-343 iTunes
server.
Specifies the folder or directory that
will be shared by the iTunes server.
Select
root
to share all files on all
volumes, or click
Browse
to select
a specific folder.
Sets password for the iTunes
server. (Optional)
Select the auto refresh mode from
the drop-down menu.
Click on the
Save Settings
button to
apply and save the new settings.
Auto Refresh
When content is added or deleted from the available folders, click the
Refresh
button and the DNS-343 will scan for
file updates. While the update scan is underway, iTunes files will not be available for use by clients on the network.
Save Settings

Rate

4.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top