Page 36 / 70
Scroll up to view Page 31 - 35
3´
D-Link DNS-3±3 User Manual
Section 3 - Configuration
DHCP Server
DHCP Server
Starting IP
Address
Lease Time
The DNS-323 can also be used as a DHCP Server.
As a DHCP server, it can be used to serve IP addresses to devices
on your local network, however, this feature should not be enabled if you already have a DHCP server, such as a router
on your local network.
Enables or Disables the DNS-323
DHCP Server.
Enter the starting IP address for the
range of addresses assigned by the
DHCP server.
Ending IP
Address
Enter the ending IP address for the
range of addresses assigned by the
DHCP server.
Sets the duration of time that an IP
address will remain assigned to a
device.
Page 37 / 70
3µ
D-Link DNS-3±3 User Manual
Section 3 - Configuration
Admin
User Name
Password
New Password
Confirm
Password
Tools
The Admin menu allows you to set a password for the admin account.
It is recommended to set an admin account
password when first configuring the DNS-323.
The administrator user name
is
admin,
and this cannot be
changed.
Enter the current password.
Enter the new password.
Enter the new password again for
confirmation.
Click Save Settings
to save the new password.
Page 38 / 70
3¶
D-Link DNS-3±3 User Manual
Section 3 - Configuration
Time
NTP Server
From My
Computer
Set Time
Manually
Daylight
Saving Time
The DNS-323 Time menu contains several different options for setting the device’s internal clock.
It is important that
accurate time is set so that scheduled backups and downloads will be accurate.
Network Time Protocol (NTP)
synchronizes the DNS-323 with an
Internet time server.
Enter the IP Address or domain
name of the time server you want
to sync the DNS-323 with and click
Set Time
.
This option will synchronize the
DNS-323 clock with the computer
being used to configure it.
Click
Set Time
to sync with the local
computer.
This option allows you to set the
time and date manually.
Enter the appropriate time and date
and click
Set Time.
Available Daylight Saving Time
options are
None, USA, or EU
(Europe).
Select the appropriate option and
click
Set Time
.
Page 39 / 70
3·
D-Link DNS-3±3 User Manual
Section 3 - Configuration
System
Restart
Restore
Defaults
Configuration
Settings
Idle Time
The DNS-323 System menu provides options for system restarts, saving and loading configuration settings, and setting
idle times.
Click
Restart
to reboot the
DNS-323.
Click
Restore
to reset the DNS-323
to it’s factory default settings.
This
will erase all previous configuration
changes.
Click
Save
to save the current
DNS-323 configuration settings to
a file on the local computer. If at a
later time you need to reload this
configuration after a system reset,
browse to the file and click
Load
.
Enter the time (in minutes) that
the administrator will be allowed
to remain idle while accessing the
DNS-323 configuration settings or
that users will be allowed to remain
idle while accessing the download
schedule settings.
Click
Apply
to save the settings.
Page 40 / 70
²0
D-Link DNS-3±3 User Manual
Section 3 - Configuration
Firmware
Firmware
Upgrade
Current
Firmware Info
The DNS-323 Firmware menu makes it simple to check for new firmware releases and upload them to the device.
This section provides a link to
check for new firmware on the
D-Link support website.
If a new firmware is available,
download the file to your local
computer.
This section provides information
about the current DNS-323
firmware.
When upgrading the firmware, click
Browse
to select the new firmware
file on your local computer.
Click
Apply
to begin the firmware
upgrade process.
19216811.live