Page 6 / 12
Scroll up to view Page 1 - 5
´
D-Link DIV-140 Quick Install Guide
After setting the IP address, you can configure the DIV-140 from the web
configuration using a computer on your LAN.
Open a web browser and
browse to the IP address of the DIV-140 using https.
Ex.
Click
Yes
Save the IP settings by using the “
save
” command.
Press Enter,
and the DIV-140 will save the settings and reboot:
A Security Alert window will appear:
Page 7 / 12
µ
D-Link DIV-140 Quick Install Guide
After logging in, the System Information page will appear:
A login box will appear.
Enter the user name and password. The default
user name is
admin
, and the default password is
password
.
Click
OK
Page 8 / 12
¶
D-Link DIV-140 Quick Install Guide
The following figure displays the setup for making VoIP to PSTN calls using
the DIV-140:
Page 9 / 12
·
D-Link DIV-140 Quick Install Guide
The configuration settings on the DIV-140 are as follows:
After logging into the DIV-140, browse to the
System Configuration >
Device
page:
Verify the Country is set to the correct region and click
Apply
:
Verify the IP Configuration settings are correct, and click
Apply
:
Browse to the
Network Configuration > General
page:
Page 10 / 12
10
D-Link DIV-140 Quick Install Guide
Enter the
VoIP Server IP PBX
IP address or domain name and
Server Port. The server port is
5060
by default. Click
Apply
:
Browse to the
Network Configuration > General
page:
Browse to the
Port Configuration > General
page:
The DIV-140 has four (4) PSTN ports numbered 1-4.
Select port
1 and configure the
Phone Number
and
Display Name
as
2001
Click
Apply
:
19216811.live