Page 121 / 159
Scroll up to view Page 116 - 120
117
D-Link DIR-895L User Manual
Section 4 - Configuration
Statistics
On the Statistics page you can view the amount of packets that pass through the
router on the WAN, LAN, and wireless segments.
In the Management menu on the bar on the top of the page, click
Statistics
.
You can view the
Internet
,
LAN
,
Wi-Fi 2.4 GHz
, or
Wi-Fi 5 GHz
by clicking on the
respective tabs at the top. The graph will update in real time. To clear the information
on the graph, click
Clear
.
The traffic counter will reset if the device is rebooted.
DIR-895L
Page 122 / 159
118
D-Link DIR-895L User Manual
Section 5 - Connecting to a Wireless Network
Connect a Wireless Client to your Router
WPS Button
Step 2
- Within 2 minutes, press the WPS button on your wireless device (or launch the software utility and start the WPS
process).
The easiest and most secure way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most
wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS
button (or a software utility with WPS) that you can press to connect to the DIR-895L router. Please refer to your user manual
for the wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps
below:
Step 1
- Press the WPS button on the DIR-895L for about 1 second. The Internet LED on the front will start to blink.
Step 3
- Allow up to 1 minute for your connection to be configured. Once the Internet light stops blinking, you will be
connected and your wireless connection will be secure with WPA2.
WPS Button
Page 123 / 159
119
D-Link DIR-895L User Manual
Section 5 - Connecting to a Wireless Network
Windows® 8
WPA/WPA2
It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring
your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being
used.
To join an existing network, locate the wireless network icon in the
taskbar next to the time display.
Wireless Icon
Clicking on this icon will display a list of wireless networks that are
within connecting proximity of your computer. Select the desired
network by clicking on the network name.
Page 124 / 159
120
D-Link DIR-895L User Manual
Section 5 - Connecting to a Wireless Network
You will then be prompted to enter the network security key (Wi-Fi
password) for the wireless network. Enter the password into the box and
click
Next
.
If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router,
you can also press the WPS button on your router during this step to
enable the WPS function.
When you have established a successful connection to a wireless
network, the word
Connected
will appear next to the name of the
network to which you are connected to.
Page 125 / 159
121
D-Link DIR-895L User Manual
Section 5 - Connecting to a Wireless Network
Windows® 7
It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring
your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.
1. Click on the wireless icon in your system tray (lower-right corner).
2. The utility will display any available wireless networks in your area.
Wireless Icon
WPA/WPA2
19216811.live