1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DIR-895L
    5. /
  5. 24
Page 116 / 159 Scroll up to view Page 111 - 115
112
D-Link DIR-895L User Manual
Section 4 - Configuration
Schedule
Some configuration rules can be set according to a pre-configured schedule. To
create, edit, or delete schedules, from the Time page click
Schedule
. To return to
the Time page, click
Time
.
If you wish to remove a rule, click on its trash can icon in the Delete column. If you
wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a
new rule, click the
Add Rules
button
.
Click
Save
when you are done. If you edit or
create a rule, the following screen will appear:
First, enter the name of your schedule in the
Name
field.
Each box represents one hour, with the time at the top of each column. To add a time
period to the schedule, simply click on the start hour and drag to the end hour. You
can add multiple days to the schedule, but only one period per day.
To remove a time period from the schedule, click on the cross icon.
Click
OK
when you are done.
DIR-895L
Page 117 / 159
113
D-Link DIR-895L User Manual
Section 4 - Configuration
System Log
Check this box to send the router logs to a SysLog Server. If this is
disabled, there will be no other options on this page.
Enter the IP address for the Syslog server. If the Syslog server is
connected to the router, select it from the drop-down menu to
automatically populate the field.
If you want the logs to be automatically sent to an email address,
enable this option.
Enter the settings for your email account. These are obtained from
your email service provider.
If email notification is enabled, this option will set the router to send
the log by email when the log is fully.
This option can be enabled to send an email according to a pre-
configured schedule. See below.
If you enable
On Schedule
is enabled, use the drop-down menu
to select the time schedule that the rule will be enabled on. The
schedule may be set to
Always Enable
, or you can create your own
schedules in the
Schedules
section (refer to page 112).
Click
Save
when you are done.
Enable Logging
to Syslog
Server:
Syslog Server IP
Address:
Enable Email
Notification:
On Log Full:
On Schedule:
Schedule:
The router keeps a running log of events. This log can be sent to a Syslog server, and sent to your email address. In the Management menu on the
bar on the top of the page, click
System Log
.
DIR-895L
Page 118 / 159
114
D-Link DIR-895L User Manual
Section 4 - Configuration
Admin
This page will allow you to change the administrator (Admin) password and enable remote management.
In the Management menu on the bar on the top of the page, click
Admin
.
Enter a new password for the administrator account. You will need to
enter this password whenever you configure the router using a web
browser.
Enables a challenge-response test to require users to type letters or
numbers from a distorted image displayed on the screen to prevent
online hackers and unauthorized users from gaining access to your
router’s network settings.
Check to enable HTTPS to connect to the router securely. Instead of
using
, you must use
https://dlinkrouter.
local./
in order to connect to the router.
Remote management allows the DIR-895L to be configured from the
Internet by a web browser. A password is still required to access the web
management interface.
The port number used to access the DIR-895L is used in the URL.
Example:
where x.x.x.x is the Internet IP address
of the DIR-895L and 8080 is the port used for the web management
interface.
Note:
If you enabled
HTTPS Server
and wish to access the router remotely
and securely, you must enter
https://
at the beginning of the address.
Click
Save
when you are done.
Password:
Enable
Graphical
Authentication
(CAPTCHA):
Enable HTTPS
Server:
Enable Remote
Management:
Remote Admin
Port:
To load, save, or reset settings, or reboot the router, click
System
and refer to page 115.
DIR-895L
Page 119 / 159
115
D-Link DIR-895L User Manual
Section 4 - Configuration
System
This option will save the current router configuration settings to a file
on your computer.
This option will load a previously saved router configuration file. This
will overwrite the router’s current configuration.
This option will restore all configuration settings back to the settings that
were in effect at the time the router was shipped from the factory. Any
settings that have not been saved will be lost, including any rules that
you have created. If you want to save the current router configuration
settings, use the
Save Settings To Local Hard Drive
button above.
You may configure the router to automatically reboot at a set time.
Please note, the router will be temporarily unavailable while rebooting.
Click to reboot the router immediately.
You may select
Never
,
Daily
, or
Weekly
.
Choose the day of the week to automatically reboot the router.
Choose the time of day to automatically reboot the router.
Click
Save
when you are done.
Save Settings
To Local Hard
Drive:
Load Settings
From Local
Hard Drive:
Restore To
Factory Default
Settings:
Auto Reboot
Configuration
Reboot The
Device:
Auto Reboot:
Day of the
week:
Time:
This page allows you to save the router’s current configuration, load a previously saved
configuration, reset the router to its factory default settings, or reboot the router.
From the Admin page, click
System
. To return to the Admin page, click
Admin
.
DIR-895L HW:A1 FW:1.00
Page 120 / 159
116
D-Link DIR-895L User Manual
Section 4 - Configuration
Upgrade
This page will allow you to upgrade the router’s firmware or language pack, either automatically or manually. To manually upgrade the firmware
or language pack, you must first download the relevant file from
.
In the Management menu on the bar on the top of the page, click
Upgrade
.
The current firmware’s version and date will be displayed.
Click this button to prompt the router to automatically check for a new
firmware version. If a newer version is found, it will prompt you to install it.
If you wish to upgrade manually, first download the firmware file you
wish to upgrade to. Next, click the
Upgrade Firmware
button and
browse to the file to install the new firmware. You can also browse to a
language pack file to install a new language pack.
Firmware
Information:
Check for New
Firmware:
Upgrade
Firmware:
DIR-895L

Rate

4 / 5 based on 1 vote.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top